Problem with importing cans mesh from Salome

motti · July 13, 2022, 15:46

Hi

I am using SU2 7.3.1 and trying to use a cgns mesh exported from Salome.

I am receiving the following error message:

Parsing config file for zone 0
Assertion failed: (head && *head), function H5CX__pop_common, file ../externals/cgns/hdf5/H5CX.c, line 3579.
Abort

Does someone knows why and what can I do to solve it?

Thanks

bigfootedrockmidget · July 16, 2022, 02:29

Maybe it is in the wrong format.

Please check if you have the option to save the cgns in ADF format, since this is the only cgns format currently supported by SU2.

motti · July 16, 2022, 03:22

Quote:

Originally Posted by bigfootedrockmidget

Maybe it is in the wrong format.

Please check if you have the option to save the cgns in ADF format, since this is the only cgns format currently supported by SU2.

Hi

Unfortunately I can't find a control on the type of CGNS output.

bigfootedrockmidget · July 16, 2022, 06:57

You can install cgnstools, you will then have the conversion tools hdf2adf and adf2hdf:
https://cgns.github.io/CGNS_docs_cur...ols/tools.html

motti · July 19, 2022, 05:57

Quote:

Originally Posted by bigfootedrockmidget

You can install cgnstools, you will then have the conversion tools hdf2adf and adf2hdf:
https://cgns.github.io/CGNS_docs_cur...ols/tools.html

Thanks. I'll check it out.

bigfootedrockmidget · July 19, 2022, 07:34

Let us know the outcome so future generations can benefit

July 13, 2022, 15:46	Problem with importing cans mesh from Salome	#1
motti New Member Motti Adar Join Date: Jul 2022 Posts: 3 Rep Power: 3	Hi I am using SU2 7.3.1 and trying to use a cgns mesh exported from Salome. I am receiving the following error message: Parsing config file for zone 0 Assertion failed: (head && *head), function H5CX__pop_common, file ../externals/cgns/hdf5/H5CX.c, line 3579. Abort Does someone knows why and what can I do to solve it? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"There was a problem importing the mesh..."	JohMey	CFX	6	February 13, 2018 10:19
[Other] Mesh Importing Problem	cuteapathy	ANSYS Meshing & Geometry	2	June 24, 2017 05:29
Problem occurring while importing mesh file in Fluent	RajG	FLUENT	0	June 2, 2015 09:30
Problem when importing Gambit mesh into CFX-Pre,Self creation of a face"Primitive 2D"	yidiragawa	CFX	0	April 15, 2014 10:11
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10

July 16, 2022, 02:29		#2
bigfootedrockmidget Senior Member bigfoot Join Date: Dec 2011 Location: Netherlands Posts: 504 Rep Power: 17	Maybe it is in the wrong format. Please check if you have the option to save the cgns in ADF format, since this is the only cgns format currently supported by SU2.

July 16, 2022, 06:57		#4
bigfootedrockmidget Senior Member bigfoot Join Date: Dec 2011 Location: Netherlands Posts: 504 Rep Power: 17	You can install cgnstools, you will then have the conversion tools hdf2adf and adf2hdf: https://cgns.github.io/CGNS_docs_cur...ols/tools.html

July 19, 2022, 07:34		#6
bigfootedrockmidget Senior Member bigfoot Join Date: Dec 2011 Location: Netherlands Posts: 504 Rep Power: 17	Let us know the outcome so future generations can benefit