CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > SU2

Questions about zero-dimensionnal thermalbath

Register Blogs Community New Posts Updated Threads Search

Like Tree2Likes
  • 1 Post By wallym
  • 1 Post By wallym

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old   March 3, 2024, 22:30
Default Questions about zero-dimensionnal thermalbath
  #1
Member
 
AN
Join Date: Jan 2024
Posts: 43
Rep Power: 2
KleinMoretti is on a distinguished road
Hello,everyone!
I have read《SU2-NEMO: An Open-Source Framework for High-Mach Nonequilibrium Multi-Species Flows》 and would like to try to reproduce some simple examples.

The first is the zero dimensionnal thermalbath using N2 gas model. I tried to solve it with NEMO EULER, but I found a strange problem.

The result about Tve and Ttr is very similar to the picture in the article,but the N2 massfraction is a little higher than the convergence value in the article. My N2 massfraction convergence value is 0.7787, while the convergence value in the article is around 0.65.

The calculation of Tve and Ttr is related to the source term in the eve equation, the source term in the eve equation is related to wdot1 and wdot2. So the mass fraction and the temperature should be coupled together? Why is the temperature correct but the mass fraction wrong?

Thank you in advance for your time and consideration. I truly appreciate any insights or advice you may have to offer.
KleinMoretti is offline   Reply With Quote

 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Map of the OpenFOAM Forum - Understanding where to post your questions! wyldckat OpenFOAM 10 September 2, 2021 05:29
[ICEM] Complex geometry mesh general questions Jack B ANSYS Meshing & Geometry 0 August 14, 2019 13:44
General questions about how to mesh and build up my case ThunderstruckGER OpenFOAM 5 September 23, 2018 18:33
possible interview questions atturh Main CFD Forum 1 February 21, 2012 08:53
NACA0012 Validation Case Questions ozzythewise Main CFD Forum 3 August 3, 2010 14:39


All times are GMT -4. The time now is 05:11.