|
[Sponsors] |
October 14, 2014, 01:08 |
How to generate a cylindrical plane?
|
#1 |
Senior Member
Sangwoo Kim
Join Date: Jul 2014
Location: Seoul, South Korea
Posts: 115
Rep Power: 11 |
Hi all.
I'm simulating about fan, and I would like to generate a contour and calculate mass flow rate along radial direction. so cylindrical plane is needed. In CFD-POST, there is a 'surface of revolution' functionality. Is there a similar one in Tecplot?? Thank you.
__________________
Best regards |
|
October 14, 2014, 18:16 |
|
#2 |
Senior Member
Scott Fowler
Join Date: May 2009
Posts: 112
Rep Power: 16 |
I wrote a Tecplot 360 add-on a while back that would do this. Information on the add-on is here: http://www.tecplottalk.com/addons/radialslice/
Right now you cannot specify an arbitrary orientation, so hopefully your geometry is aligned with one of the primary axes. It hasn't been compiled for Tecplot 360 EX, but should work with Tecplot 360 2013 and earlier. If you're on Linux, the source code is posted. If you're unable to compile it give our support group a shout and we'll help you out. Scott Fowler support@tecplot.com |
|
October 15, 2014, 02:01 |
|
#3 |
Senior Member
Sangwoo Kim
Join Date: Jul 2014
Location: Seoul, South Korea
Posts: 115
Rep Power: 11 |
This is awesome!
I'll try and give you feedback if i'm lost again. Thank you very much.
__________________
Best regards |
|
October 15, 2014, 04:47 |
|
#4 |
Senior Member
Sangwoo Kim
Join Date: Jul 2014
Location: Seoul, South Korea
Posts: 115
Rep Power: 11 |
Hi again!
I didn't understand how to use... I copied radialslice.dll file, and pasted it into 'bin' folder and next step is unclear to me. 3. Add this line to your tecplot.add file: $!LoadAddon "radialslice" What does it mean?? I found tecplot.add file, but it is not open-able at least in my computer. Thank you.
__________________
Best regards |
|
October 15, 2014, 11:54 |
|
#5 |
Senior Member
Scott Fowler
Join Date: May 2009
Posts: 112
Rep Power: 16 |
You should be able to edit tecplot.add with a text editor like Notepad. If you can't, perhaps the permissions on the file are wrong.
If you can't edit this file you can do either of the following: Add "-loadaddon radialslice.dll" to the command line arguments when launching 360. or Drag-and-drop radialslice.dll onto an open instance of 360. Hope that helps. Scott |
|
October 18, 2014, 10:53 |
|
#6 |
Senior Member
Sangwoo Kim
Join Date: Jul 2014
Location: Seoul, South Korea
Posts: 115
Rep Power: 11 |
I have tried several times, but they failed..
tecplot.add is opened on Wordpad, but it said that it cannot be saved. I think I should open it with the right of manager, but it was not activated when I right-clicked tecplot.add I also tried drag-and-drop, but it didn't work. And what is command line argument? I'm using Tecplot 360 2012R1, and there is no options like it when launching
__________________
Best regards |
|
October 20, 2014, 12:40 |
|
#7 |
Senior Member
Scott Fowler
Join Date: May 2009
Posts: 112
Rep Power: 16 |
To use the command-line argument, Tecplot 360 must be in your PATH, or you must 'cd' to the 'bin' directory, where tec360.exe exists. Also, make sure to copy the add-on into the 'bin' directory.
Once you've done that, the command line would look like this: >tec360.exe -loadaddon radialslice.dll |
|
October 21, 2014, 01:48 |
|
#8 |
Senior Member
Sangwoo Kim
Join Date: Jul 2014
Location: Seoul, South Korea
Posts: 115
Rep Power: 11 |
Thank you very much Scott. It's really helpful.
I didn't understand what command line means, and now I do. I opened it successfully. I want to make it along z-direction. I decided the radius. And I think there is no option for the range of z. I mean, I want to make cylinder along z direction with the height of 0.1m Is there a way to do?
__________________
Best regards |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Gmsh] Problem with Gmsh | nishant_hull | OpenFOAM Meshing & Mesh Conversion | 23 | August 5, 2015 02:09 |
[ICEM] How to generate sunstructured "all-tri patch-dependant" surface mesh in ICEM? | jash | ANSYS Meshing & Geometry | 19 | July 23, 2013 18:48 |
Plane stress and plane strain cases for stress analysis | Sargam05 | OpenFOAM | 0 | May 3, 2013 18:16 |
[blockMesh] How to use blockMesh to generate cylindrical T-junction | norkistar | OpenFOAM Meshing & Mesh Conversion | 2 | January 28, 2013 20:53 |
[Gmsh] boundaries with gmshToFoam | ouafa | OpenFOAM Meshing & Mesh Conversion | 7 | May 21, 2010 12:43 |