Techplot is not able to open CFD++ post porcessing data

balkrishan · October 31, 2017, 00:31

Hi,
Is anybody know the solution for this error.

I have generated tecplot file in CFD++ and when i am opening it in "Tecplot 360 EX R1" it showing this error (invalid integer no in DEM file at byte offset 151)

I don't know how to correct this, if sombody knows please help.

Thank you

wsfowler · November 12, 2017, 20:21

It looks like somehow Tecplot's DEM reader is trying to load the file. Make sure you select the Tecplot Loader in the "Files of Type" box of the Load Data dialog.

Let me know if that works for you.

Scott

balkrishan · November 13, 2017, 12:44

Yes, The default loader is DEM Loader. But, when I am going to change it to Techplot Loader it not showing the files which I wand to open.

I have no idea what's happening.

Thanks for your response. If you have any idea please share.

wsfowler · November 13, 2017, 14:27

Type *.bin in the Files field - this will display non-standard file extensions. We've added *.bin and *.tec in later releases since these are popular (though non-standard) extensions for Tecplot files.

balkrishan · November 13, 2017, 23:38

Yeh! it worked ...

Thanks a lots Scott

November 12, 2017, 20:21		#2
wsfowler Senior Member Scott Fowler Join Date: May 2009 Posts: 112 Rep Power: 16	It looks like somehow Tecplot's DEM reader is trying to load the file. Make sure you select the Tecplot Loader in the "Files of Type" box of the Load Data dialog. Let me know if that works for you. Scott balkrishan likes this.

November 13, 2017, 14:27		#4
wsfowler Senior Member Scott Fowler Join Date: May 2009 Posts: 112 Rep Power: 16	Type .bin in the Files field - this will display non-standard file extensions. We've added .bin and *.tec in later releases since these are popular (though non-standard) extensions for Tecplot files. balkrishan likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] How to get the coordinates of velocity data at all cells and at all times	vidyadhar	ParaView	9	May 20, 2020 20:06
[swak4Foam] groovyBC in openFOAM-2.0 for parabolic velocity bc	ofslcm	OpenFOAM Community Contributions	25	March 6, 2017 10:03
Problem compiling a custom Lagrangian library	brbbhatti	OpenFOAM Programming & Development	2	July 7, 2014 11:32
"parabolicVelocity" in OpenFoam 2.1.0 ?	sawyer86	OpenFOAM Running, Solving & CFD	21	February 7, 2012 11:44
How to update polyPatchbs localPoints	liu	OpenFOAM Running, Solving & CFD	6	December 30, 2005 17:27

November 13, 2017, 23:38		#5
balkrishan Member Bal Krishan Join Date: Jul 2017 Posts: 43 Rep Power: 8	Yeh! it worked ... Thanks a lots Scott