CFD Online Logo CFD Online URL
Home > Forums > CFX

moving mesh in 5.5?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 9, 2002, 04:17
Default moving mesh in 5.5?
Posts: n/a
hello, cfx 5.5 can solve turbomachinery problem about moving mesh boundary condition between rotor and stator? and cfx 5.5 can show animation result with rotate rotor in time (like cfx-tascflow)?

  Reply With Quote

Old   July 10, 2002, 02:35
Default Re: moving mesh in 5.5?
Posts: n/a
  Reply With Quote

Old   July 10, 2002, 16:07
Default Re: moving mesh in 5.5?
Posts: n/a
Dear s.

As far as I know, you can not do this in CFX 5.5. The only option is the frozen rotor specification, which ommits the time dependent rotor-stator interaction. However, be patient as CFX 5.5.1 is fully equiped for the simulation you want to perform. CFX 5.5.1 will be released asap.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
Dynamic Mesh moving interface help akash.iitb FLUENT 0 August 23, 2010 23:53
Moving (structured) mesh Jesper CFX 5 February 2, 2007 04:43

All times are GMT -4. The time now is 09:04.