Using a Parameter Set with Fluent Meshing Workflow

ro_bb · July 5, 2019, 09:26

I wanna use the Fluent Meshing Workflow with Workbench instead of Ansys Meshing to generate my mesh.

In meshing mode the geometry is not taken from a geometry element, so I don't know how to use Parameter Sets. If I link the geometry to my Fluent (with Fluent Meshing) object I can see it in the Outline View, but in the workflow I'm still asked to import a geometry.

Is there a way to use the Parameter Set or do I have to use a UDF?

Thank you!

ro_bb · July 18, 2019, 05:06

I found a way to use the Workbench with the watertight geometry workflow and SpaceClaim.

I had to activate the beta functionalities in the settings of Workspace and then connect the geometry box to the mesh of a Fluent Meshing box. Finally, I had to select the Mesh and activate "Use Workflow" in the properties of the mesh.

July 5, 2019, 09:26	Using a Parameter Set with Fluent Meshing Workflow	#1
ro_bb New Member Robin Join Date: May 2019 Posts: 7 Rep Power: 7	I wanna use the Fluent Meshing Workflow with Workbench instead of Ansys Meshing to generate my mesh. In meshing mode the geometry is not taken from a geometry element, so I don't know how to use Parameter Sets. If I link the geometry to my Fluent (with Fluent Meshing) object I can see it in the Outline View, but in the workflow I'm still asked to import a geometry. Is there a way to use the Parameter Set or do I have to use a UDF? Thank you! Светлана and aeh like this.

July 18, 2019, 05:06	Use of workflow is possible	#2
ro_bb New Member Robin Join Date: May 2019 Posts: 7 Rep Power: 7	I found a way to use the Workbench with the watertight geometry workflow and SpaceClaim. I had to activate the beta functionalities in the settings of Workspace and then connect the geometry box to the mesh of a Fluent Meshing box. Finally, I had to select the Mesh and activate "Use Workflow" in the properties of the mesh.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] ICEM Scripting Issues	tylerplowright	ANSYS Meshing & Geometry	33	September 27, 2021 16:35
Custom Parameter Output in Fluent using Scheme	ishan_ae	Fluent UDF and Scheme Programming	0	April 13, 2018 10:02
Transfer named selections from SW to Fluent Meshing	the-sted	FLUENT	0	May 1, 2016 23:44
[ANSYS Meshing] Suggested workflow for cavity meshing	the-sted	ANSYS Meshing & Geometry	0	April 26, 2016 14:48
[snappyHexMesh] determining displacement for added points	CFDnewbie147	OpenFOAM Meshing & Mesh Conversion	1	October 22, 2013 09:53