|
[Sponsors] |
February 14, 2024, 08:18 |
Unable to read .dat file - multiple errors
|
#1 |
Member
Join Date: Aug 2021
Posts: 59
Rep Power: 4 |
I'm trying to read some data from a job, the case file loads fine, but reading the data file gives this error:
Reading from (redacted)" in NODE0 mode ... HDF5-DIAG: Error detected in HDF5 (1.10.5) MPI-process 0: #000: /home2/cfx5test/TFSAgents/milce7cfxbld03.ansys.com/_work/_tool/.conan/data/hdf5/1.10.5.1/thirdparty/stable/build/68bf2afdc9a0b0f9b86fe10aa9c5e44ddb25e893/hdf5-1.10.5/src/H5F.c line 509 in H5Fopen(): unable to open file major: File accessibilty minor: Unable to open file #001: /home2/cfx5test/TFSAgents/milce7cfxbld03.ansys.com/_work/_tool/.conan/data/hdf5/1.10.5.1/thirdparty/stable/build/68bf2afdc9a0b0f9b86fe10aa9c5e44ddb25e893/hdf5-1.10.5/src/H5Fint.c line 1652 in H5F_open(): unable to read superblock major: File accessibilty minor: Read failed #002: /home2/cfx5test/TFSAgents/milce7cfxbld03.ansys.com/_work/_tool/.conan/data/hdf5/1.10.5.1/thirdparty/stable/build/68bf2afdc9a0b0f9b86fe10aa9c5e44ddb25e893/hdf5-1.10.5/src/H5Fsuper.c line 623 in H5F__super_read(): truncated file: eof = 1153433600, sblock->base_addr = 0, stored_eof = 6571290282 major: File accessibilty minor: File has been truncated Abort(470407172) on node 0 (rank 0 in comm 0): Fatal error in PMPI_Send: Invalid tag, error stack: PMPI_Send(159): MPI_Send(buf=0x7f4a192aeb98, count=30, MPI_BYTE, dest=1, tag=1010101, comm=0x84000003) failed PMPI_Send(97).: Invalid tag, value is 1010101 Abort(1007273732) on node 1 (rank 1 in comm 0): Fatal error in PMPI_Recv: Invalid tag, error stack: PMPI_Recv(173): MPI_Recv(buf=0x152df980, count=30, MPI_BYTE, src=0, tag=1010101, comm=0x84000002, status=0x7ffe62ebe870) failed PMPI_Recv(105): Invalid tag, value is 1010101 Abort(671729412) on node 2 (rank 2 in comm 0): Fatal error in PMPI_Recv: Invalid tag, error stack: PMPI_Recv(173): MPI_Recv(buf=0x15211430, count=30, MPI_BYTE, src=0, tag=1010101, comm=0x84000002, status=0x7ffc3b4f67f0) failed PMPI_Recv(105): Invalid tag, value is 1010101 Abort(873056004) on node 3 (rank 3 in comm 0): Fatal error in PMPI_Recv: Invalid tag, error stack: PMPI_Recv(173): MPI_Recv(buf=0x153518a0, count=30, MPI_BYTE, src=0, tag=1010101, comm=0x84000002, status=0x7ffc572cb5f0) failed PMPI_Recv(105): Invalid tag, value is 1010101 Abort(940164868) on node 6 (rank 6 in comm 0): Fatal error in PMPI_Recv: Invalid tag, error stack: PMPI_Recv(173): MPI_Recv(buf=0x168d7cb0, count=30, MPI_BYTE, src=0, tag=1010101, comm=0x84000002, status=0x7ffd41b13ff0) failed PMPI_Recv(105): Invalid tag, value is 1010101 Abort(269076228) on node 14 (rank 14 in comm 0): Fatal error in PMPI_Recv: Invalid tag, error stack: PMPI_Recv(173): MPI_Recv(buf=0x14e36680, count=30, MPI_BYTE, src=0, tag=1010101, comm=0x84000002, status=0x7fff35d69770) failed PMPI_Recv(105): Invalid tag, value is 1010101 Abort(537511684) on node 25 (rank 25 in comm 0): Fatal error in PMPI_Recv: Invalid tag, error stack: PMPI_Recv(173): MPI_Recv(buf=0x16752c70, count=30, MPI_BYTE, src=0, tag=1010101, comm=0x84000002, status=0x7ffe57a51670) failed PMPI_Recv(105): Invalid tag, value is 1010101 The fluent process could not be started. What does any of this mean? Any Ideas? Last edited by cons013; February 14, 2024 at 08:19. Reason: personal info |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFoam "Permission denied" and "command not found" problems. | iyidaniel@yahoo.co.uk | OpenFOAM Running, Solving & CFD | 11 | January 2, 2018 06:47 |
polynomial BC | srv537 | OpenFOAM Pre-Processing | 4 | December 3, 2016 09:07 |
[foam-extend.org] problem when installing foam-extend-1.6 | Thomas pan | OpenFOAM Installation | 7 | September 9, 2015 21:53 |
[Other] Adding solvers from DensityBasedTurbo to foam-extend 3.0 | Seroga | OpenFOAM Community Contributions | 9 | June 12, 2015 17:18 |
OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |