|
[Sponsors] |
September 18, 2013, 07:15 |
lost data in partition,unmounted and empty
|
#1 | |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
Quote:
I remember I did one or two stages of that blog of yours and then determined not to continue.how can mount it again? all my thesis files are there please help with care! why this has been occurred? I had stored most of my cases there and named the partition "Important",its volume was 0(empty) at first and now is 130MB occupied on disc without any file or folder.my thesis folder is empty.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by immortality; September 18, 2013 at 11:21. |
||
September 18, 2013, 17:51 |
|
#2 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
I brought it to a store that recoveres lost data and he told me that he can restore my thesis files.
Today it showed me a message that its a unmounted drive when i wanted to open the partition E: and when i start Windows it was empty too. It was fine last night.i moved a folder of cases and returned paraview folder to linux desktop and it worked fine at that time. What was the cause? Is there anything that i better tell to recovery center that helps them?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
September 18, 2013, 19:21 |
lost data in partition,unmounted and empty
|
#3 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
linux shows the message that E partition is unmounted! not accessible in Windows even.how can mount it again? all my thesis files are there why this has been occurred? I had stored most of my cases there and named the partition "Important",its volume was 0(empty) at first(when it became not accessible) and now 130MB is occupied on disc without any other(other than system information folder that originated when i used partition manager software for recovering the folders back)file or folder.my thesis folder is empty.
I brought it to a store some hours before that recoveres lost data and he told me that he can restore my thesis files. It was almost fine last night.i moved a folder of cases and returned paraview folder to linux desktop and it worked fine at that time. What was the cause? Is there anything that i better tell to recovery center that helps them? And i remember that when i was entering to a folder with a lot of files in another partition the PC was became very slow and mouse was moving slowly and with discontinuity and if i left the PC it went to a situation like hibernate but without any responce so that i had to restart it. This issue repeated today for the partition of my thesis and i restarted the PC but didn't check immediately the partition but think may that be the cause. I used some softwares in Windows without success. I have a semi bach up of main files but not for papers,axiliary cases,...
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by wyldckat; September 21, 2013 at 13:03. Reason: Note: this is actually the first post on this thread. |
|
September 19, 2013, 19:19 |
|
#4 | ||
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
Quote:
Quote:
My guess is that you did not take the necessary precautions and therefore this would end up happening sooner or later, even if you hadn't followed some of the steps from my blog post. Best regards, Bruno
__________________
|
|||
September 20, 2013, 05:55 |
|
#5 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
dear Bruno
I rememberd now that i downloaded the file was specified in the firsta of the blog and didn't any steps as remember(didn't continue) In downloding message it was written that some space will be deleted! I didn't pay attention to what space it means and how much due to hurry,i had opened the terminal in the root of that ntfs partition,this had occurred very before that a download command had deleted some information instead of adding files,i think it has happened again. I myself don't know when it has happened exactly during that day.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
September 20, 2013, 06:04 |
|
#6 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
edit button doesn't work in the cell phone opera browser.
I myself don't know when it has happened exactly during that day and guess. Its internal wd 300g hard disc. Can they return information in your opinion? I tried using some software in windows without much success.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
September 21, 2013, 13:33 |
|
#7 | |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
I've moved all of the relevant posts for this topic from the thread http://www.cfd-online.com/Forums/ope...-3-12-a-4.html Now, let me re-read all of the thread again, to figure out what I can suggest.... OK, so the problem seems that you're not even sure what you did for this to happen. Now, going back to what I wrote about creating a file-based partition: Quote:
And from the post #3 (which originally was the first post on this thread), it would seem that it has nothing to do with the instructions on my blog post. Now, as for the recovery of the files, the standard plan is as follows:
In all honestly, if:
Bruno
__________________
|
||
September 21, 2013, 16:14 |
|
#8 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
Hi Bruno
They are some cases like "tank" case if you remember,and a lot of pdf's. I vaguely remember i did one step of the blog in the root maybe and after that refuse to continue.if it be the case,which command may have lead to a damage? I called him and he told a lot of folder has recovered but the name of my thesis folders are not among them And i told him that awaits till i go tomorrow and see what has been recovered. I have some old backups in different places,am still confused and upset that all bad events want to occure for me one after another. I bought an external hard disc and will test recovering if they can't be recovered by the shop. ---------------------- Bruno i deleted some files for free up more space (as you know it was the reason for moving paraview folder to another partition),may the partition table be among them?can user delete it at all as it has mentioned in the link for #4?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by wyldckat; September 21, 2013 at 16:39. Reason: posted close enough... |
|
September 21, 2013, 16:48 |
|
#9 | |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Quote:
Only this would write over the whole partition, erasing both the partition table and file structure, along with anything else that would be located in that partition. But this should not have happened, if you followed the blog post correctly, because the command in the blog post explicitly says to use "of=ext4file", indicating that we want to write to the file named "ext4file". The only other possibility that I can think of is if you tried to use the commands from step #2 from this blog post: Using the official pre-built ParaView 3.10.1 version with OpenFOAM - but in this case, you would have had to use modified commands, such as: Code:
rm -rf * But as I've said many times over: without knowing the exact steps you took, we cannot know for certain what happened exactly.
__________________
|
||
September 21, 2013, 18:03 |
|
#10 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
i'm thinking what i have done that may cause the issue.but i felt in a hurry and was doing a lot of works,yes i remember i did the first step and then used ctrl+c instead of exit carelessly,may it cause such trouble?
I didn't think last posts of us be in relation to lost of data Please help me what you can about using those softwares so that the work can be done correctly. ---------------- thanks a lot,im still in the shock! Its a very good chance that main cases folders were in linux desktop and also in another partition.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by wyldckat; September 22, 2013 at 12:27. Reason: posted close enough... |
|
September 22, 2013, 12:35 |
|
#11 | |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
After thinking a while on this, here's a review on what you might want to try. First, as I wrote above: Quote:
All of this happened because you created the partition once again, by using the partition manager; instead of first contacting me or someone who knows what to do in these cases. Therefore, by creating the partition, you ended up overwriting some of the already existing data, because NTFS (so does ext3 and ext4) uses additional metadata, beyond the file structure, leading to those 130MB you talked about. Oh well... with any luck you've already managed to get back most of the files you were missing. Good luck! Bruno
__________________
|
||
September 22, 2013, 18:21 |
|
#12 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
Hi Bruno,
Thanks for your attentions a lot. I went to the recovery center shop and saw my folders have recovered exactly with their contents! I checked them and verified and the young manager told me that he will copy them to their hard disc and i can get them in my external hard disc.he told me that they use a hardware named recovery card not softwares and therefore can recover folders and structures instead of only files that have to be organized if softwares can recover them. But some folders had zero space and he said that they have been recognised in this stage and their content will be displayed after extracting data and copy to another hard. I hope i can earn my files again! I bought a 2TB internal hard disc for 152$ to not allow such thing repeat until i'm alive ! I didn't find out at last what had caused these days and nights full of thought and stress! I didn't grasp what you mentioned about partition manager dear Bruno,i used that when the data was lost. I have to have several copies for important data,right?in external or internal hard discs? I paid near all of my father's salary for a 2TB internal and a 1TB external hard discs,and my old 300GB one.i don't know how to manage them. Can i copy all of 300G hard data to 2T one so that 2 windows and one ubuntu work like before(in 300G one)? Dear Bruno I appreciate your valuable advices. Thanks a lot.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
September 23, 2013, 16:31 |
|
#13 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
Honestly, I advise you to do the minimum amount of changes as possible:
In addition, I suggest:
Good luck! Best regards, Bruno
__________________
Last edited by wyldckat; September 23, 2013 at 16:33. Reason: a few additions here and there |
|
September 27, 2013, 07:04 |
another partition unmounted.
|
#14 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
Hi Bruno,
I got my hard disc and now I saw that another partition has became unmounted with the error 2 as attached.whats the matter?he has corrupted another healthy partition.can I repair it myself?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
September 27, 2013, 18:24 |
|
#15 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
Well, something very strange is going on with your computer. Specially if you don't provide details, it's even stranger OK, a few questions:
Bruno
__________________
|
|
September 28, 2013, 08:32 |
|
#16 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
hi Bruno,
Its an internal 320G hard disk.its format is NTFS. When i brought it to the shop this partition was OK. Although when i opened a big folder the PC was getting very slow,but the files were there. When i returned it back to home,i opened it with Windows 8 that was in other internal hard disk I've bought just newly and saw it shows an error when i want to open it,that the file system is corrupted and didn't open the partition(named STore). I had made a new partition on my new hard disk with name of Store and conncted both old and new hard disks together.may their similar names make the issue?can it lead to cleaning older partition? Yes i had access to it in Windows,crash...no,only the issue was slowing down the PC when the huge folder opened located in STore partition,it was becoming slower and slower till moving mouse was not possible and i had to restart the PC. This problem occurred for the partition named important only one time and i restarted it and i guess now that the information have deleted after this occurance. And about shutdown yes,i used that in Ubuntu for some test cases like as you told in another thread. I want to bring it again to the shop. If i use those softwares can them return folders like it was before or just a lot of files list? And may it be their fault?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
September 28, 2013, 08:49 |
|
#17 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
Having partitions with the same name should not be a problem, but should be avoided, so that you yourself don't confuse between the two. When you restarted the computer on Windows, because it was being very slow... did you forcefully restart it or did Windows peacefully accept your request to restart? Check on Ubuntu with GSmartControl to check the health of the disks. I suggest that you bring the whole computer tower to the shop. Something strange is going one with your computer and they should be able to figure out what's going on. Because from my experience, it can be any of the following issues:
If the hardware is OK, then my suggestion would be to let Windows try to repair the partitions. Right clicking on each drive letter, going to the properties, then the maintenance tab, it should give you an option to check the partition and choose to do a full check. It will likely tell you that only after restarting the computer it will be able to do the scan disk, so do that. It will take a long while to perform the scan, so prepare yourself to wait. But as I said, if this is actually a hardware problem, then using scan disk could put in danger your hard-disks, because they could fail sooner than expected due to whatever might be damaged on your computer. Good luck! Bruno
__________________
|
|
September 28, 2013, 08:50 |
|
#18 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
and both shutdown and halt i tested like in shutdown thread i think or in email thread.
Can they cause some trouble? Why this happen only for secondary(data)partitions not Windows xp and Windows 7 or Ubuntu partition?(i should thank god that Ubuntu partition is healthy!my main cases are there on the desktop) I have bought the hard 5 years ago.and that softaware you told show that its healthy.can it be the work of a virus or a hacher?when the thiefs ransacked the home about 3years ago the had left this hard in the older PC.can they use some way to communicate the PC and infiltere in?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by immortality; September 28, 2013 at 10:15. |
|
September 28, 2013, 09:05 |
|
#19 | ||||
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Quote:
Quote:
Quote:
Quote:
I'm more inclined to being a result of incorrect usage of the machine, such as problems with power outages. And since you've mentioned that the CPU cooler had gotten a lot of dust on it and that you had opened the computer yourself, I suspect that something might have gone wrong in your maintenance efforts. Either way, there are too many variables at work here. And the biggest concern is a big hardware failure might be coming in, and you're being very lucky that it won't simply crash completely and not restart at all. We had one like that at work just this week and there was no clear reason as to why the power supply simply fried.
__________________
|
|||||
September 28, 2013, 10:40 |
|
#20 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
Hi Bruno
the power supply is 430 watts output and I used an online page that calculates power needed for a system and it shows 370watts.then power seems acceptable I think. I think the issue is likely related to using NTFS partitions in Ubuntu foa a long time without Windows have access to them during one year except maybe 3-4 times in earlier months. well you say that I should have allowed Windows do some modifications and maintenance work on them,right? maybe its my destiny that I have to engage serious troubles so that learn and experience new things.I don't know if they let me defense or I have to register for another semester by any chance.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Diverging Simulation using rhoSimplecFoam, kOmegaSST | AndreasP. | OpenFOAM Running, Solving & CFD | 4 | March 30, 2013 10:12 |
foamDataToFluent gives empty data files | jcn2013 | OpenFOAM Post-Processing | 1 | March 13, 2013 09:12 |
It would be wonderful if a tool for FoamToTecplot is available | luckyluke | OpenFOAM Post-Processing | 165 | November 27, 2012 06:54 |
Should an empty MRF zone really induce this much cross-flow? | sylvester | OpenFOAM | 5 | November 18, 2010 03:48 |
How to model the NR eqns in a domain with empty space | Vasilis | Main CFD Forum | 1 | April 14, 2009 04:35 |