|
[Sponsors] |
January 8, 2017, 15:19 |
thermal boundry layer
|
#1 |
Member
sa har
Join Date: Aug 2014
Posts: 34
Rep Power: 11 |
i have 2 channel with different hydraulic diameter (25mm and 30mm). air is moved in them by natural convection. boundary condition in 2 case are similar. walls of channel are under heat flux and thermal boundary layer is not fully developed in channels.finally channel with Dh=25mm has more Q=mcp(Tout-Tint) and walls temperature. can you help me to explain this phenomena? i think that when hydraulic diameter is lower, thermal boundary layer grows faster, so heat transfer between air and walls should be lower. can you explain it?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Prismatic boundary layer | KateEisenhower | enGrid | 5 | September 15, 2015 07:48 |
CAD to SALOME with Structured Boundry Mesh layer | Annuminas | Mesh Generation & Pre-Processing | 0 | November 18, 2013 07:29 |
[snappyHexMesh] Boundary layer generation problems | ivan_cozza | OpenFOAM Meshing & Mesh Conversion | 0 | October 6, 2010 13:47 |
errors | Fahad | Main CFD Forum | 0 | March 23, 2004 13:20 |
Info: Short Course On Thermal Design of Electronic Equipment | Arnold Free | Main CFD Forum | 0 | August 10, 1999 10:18 |