|
[Sponsors] |
June 13, 2001, 01:35 |
Suggest a post processor for visualisation
|
#1 |
Guest
Posts: n/a
|
I think the title is sufficient - please add : vectors and contours (2D). Thanks in advance
|
|
June 13, 2001, 04:02 |
Re: Suggest a post processor for visualisation
|
#2 |
Guest
Posts: n/a
|
I think Tecplot is a strong post-processor.
|
|
June 13, 2001, 04:46 |
Re: Suggest a post processor for visualisation
|
#3 |
Guest
Posts: n/a
|
Hi, Mukhopadhyay
If you use Windows TECPLOT is Ok but it is not free. Otherwise, try to use any Linux distribution and you will see the great performances of a free source codes such as: popiplot (http://www.lmm.jussieu.fr/MEMBERS/PO...lot/index.html or Vis5D (at rpmfind.net I think). Good luck Kike |
|
June 13, 2001, 05:36 |
Re: Suggest a post processor for visualisation
|
#4 |
Guest
Posts: n/a
|
Use Fieldview
|
|
June 14, 2001, 14:54 |
Re: Suggest a post processor for visualisation
|
#5 |
Guest
Posts: n/a
|
||
June 14, 2001, 19:24 |
Re: Suggest a post processor for visualisation
|
#6 |
Guest
Posts: n/a
|
Matlab is a good choice. You can probably find some cheap/free ones also at http://SAL.KachinaTech.COM/index.shtml
|
|
June 15, 2001, 06:33 |
THANKS!!!
|
#7 |
Guest
Posts: n/a
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ansys Post processing | ano999 | ANSYS | 1 | May 27, 2011 16:24 |
NO model vs post processing in coal combustion,CFX | sakalido | CFX | 1 | April 15, 2011 14:07 |
Export from post gives different result between v11 and v12 | bennn | CFX | 2 | February 10, 2011 05:38 |
Proper output of angle of attack in CFX post | Kevin | CFX | 3 | October 18, 2006 12:18 |
Post Processing in FEM | Abhijit Tilak | Main CFD Forum | 0 | April 26, 2004 11:59 |