Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Having trouble meshing nozzle

Updated Threads

Reply

Search this Thread

November 18, 2018, 13:35	Having trouble meshing nozzle	#1
shang2 New Member Join Date: Apr 2018 Location: Ohio, USA Posts: 15 Rep Power: 8	Hi, I am having trouble meshing a nozzle that I drew in Solidworks. It is not axis-symmetric. I have licenses for both Pointwise and Hypermesh. I would prefer a structured mesh, with points piled near the wall, but at this point, any mesh would be good. I will be using the mesh in OpenFOAM. The link below contains the Original Solidworks file as well as .step and .igs exports. https://drive.google.com/drive/folde...Xb?usp=sharing Thanks in advance!

Reply

Tags

hypermesh, mesh 3d, openfoam, pointwise, solidworks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Convergent-Divergent Nozzle with MATLAB	Obad	Main CFD Forum	8	June 2, 2020 14:10
Meshing a nozzle	parvaz747	Mesh Generation & Pre-Processing	3	June 17, 2013 11:40
[GAMBIT] Trouble meshing complex VOF geometry	RPJones	ANSYS Meshing & Geometry	2	February 14, 2011 18:54
compressible flow in a counterflow nozzle	d.vamsidhar	FLUENT	0	November 24, 2005 01:45
Trouble with meshing in Pro-am	NALLELI	Siemens	1	July 13, 2005 03:41

All times are GMT -4. The time now is 15:53.