CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Mesh generate for inducer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 16, 2019, 14:22
Default Mesh generate for inducer
  #1
New Member
 
laadri
Join Date: Mar 2016
Posts: 3
Rep Power: 5
montazar is on a distinguished road
Hi Guys...Can anyone please give me a guidance about meshing of geometry like one I attached here?(You can download it here: http://s000.tinyupload.com/?file_id=...62296441397526)
I wan to know which one of Structured Or Unstructured Meshing method's you recommend to me?

Thanks A lot
Milad Asiyaban
Email: milad_asiyaban@gmail.com
montazar is offline   Reply With Quote

Old   January 21, 2019, 04:10
Default
  #2
Senior Member
 
Colinda
Join Date: May 2012
Location: Brussels
Posts: 102
Rep Power: 9
colinda1 is on a distinguished road
Structured meshing would be preferable in this case but it may take some time depending on the tool used. Structured mesh generators dedicated to turbomachinery configurations save a lot in such case to get a high-quality mesh quickly. As an alternative unstructured meshing can be considered. In that case, I would recommend a full hexahedral mesh.

Best regards,
Colinda
colinda1 is offline   Reply With Quote

Reply

Tags
axial, cfd, icem, inducer, pump

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 32 February 7, 2018 08:26
[ICEM] How to generate this kind of mesh? mingersai ANSYS Meshing & Geometry 51 February 16, 2017 07:32
How to generate a Cartesian 2D Mesh using MATLAB? sujithsubramanian Main CFD Forum 0 March 9, 2014 15:46
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 04:24
[snappyHexMesh] SnappyHexMesh not generate mesh first time mavimo OpenFOAM Meshing & Mesh Conversion 4 August 26, 2008 07:08


All times are GMT -4. The time now is 15:34.