[RoPr]

Hello, dear visitors of the forum. My question is about installing OpenFOAM-v1812 on OpenSUSE 15.0. On the page https://www.openfoam.com/download/in...nary-linux.php brief instructions for installing from RPM packages. With YaST, the installation went to the / opt / openfoam-1812 directory. What's next? How does the program run? I did not find the startOpenFOAM script at / opt / openfoam-1812 / ... Maybe the program is not installed and need additional settings?
Tell me please. For me, this is all for the first time (both OpenFOAM and Linux)

[wyldckat]

Quick answer: How did they forget to write that on the instructions page...

OK, if the path you've reported is correct, then you can add the following line to your "~/.bashrc" file:

source /opt/openfoam-1812/etc/bashrc

edit: I've reported this issue here: https://develop.openfoam.com/Develop...us/issues/1218

[RoPr]

Hello, dear wyldckat. Thanks for your reply. I inserted this line at the end of the contents of the file opt/openfoam/etc/bashrc:
.

.

.

# Finalize setup of OpenFOAM environment for POSIX shell
if [ -d "$WM_PROJECT_DIR" ]
then
if [ -n "$FOAM_VERBOSE" ] && [ -n "$PS1" ]
then
echo "source $WM_PROJECT_DIR/etc/config.sh/setup" 1>&2
fi
. "$WM_PROJECT_DIR/etc/config.sh/setup" "$@"
else
echo "Error: did not locate installation path for $WM_PROJECT-$WM_PROJECT_VERSION" 1>&2
echo "No directory: $WM_PROJECT_DIR" 1>&2
fi

# Cleanup variables (done as final statement for a clean exit code)
unset foamOldDirs projectDir

#------------------------------------------------------------------------------
source /opt/openfoam-1812/etc/bashrc


Then press save. Then I switch to the terminal, enter the "simpleFoam -help", but nothing happens:


roman@linux-ijwm:~> simpleFoam -help
If 'simpleFoam' is not a typo you can use command-not-found to lookup the package that contains it, like this:
cnf simpleFoam


You also write "~/.bashrc". It means that the file bashrc needs to be copied from the directory /opt to the /home directory? I tried it, but it also doesn't help
How does the environment OpenFOAM run in general (from Console)?

[wyldckat]

Quick answers:

Originally Posted by RoPr

I inserted this line at the end of the contents of the file opt/openfoam/etc/bashrc:

No, no, no, no... I indicated that you have to add the line to "~/.bashrc"... what you did was add the line to the file you were meant to source... I should have pointed you to some reading material, so that you could learn what the "source" command does...

Please read the following wiki page for more details: https://openfoamwiki.net/index.php/I...with_the_Shell

Originally Posted by RoPr

You also write "~/.bashrc". It means that the file bashrc needs to be copied from the directory /opt to the /home directory? I tried it, but it also doesn't help
How does the environment OpenFOAM run in general (from Console)?

No...

Please edit the file "/opt/openfoam-1812/etc/bashrc" and remove the line you added at the bottom of it.


Then follow these steps and instructions:

1. The "~" is a short hand denomination for your personal home folder. If you run this command in the terminal:
   

   cd ~

   it will go into your own home folder.
   You can confirm this by running:
   

   pwd

2. In there you can find the file ".bashrc". You can see it by running this command:
   

   ls -la .bashrc

   this is because the files that start with a dot "." are interpreted as hidden files on Linux.
3. Therefore, the idea is that you should edit the file "~/.bashrc" and add the source command in there. So, if you run this command:
   

   gedit ~/.bashrc

   assuming that gedit is a text editor that is installed in your system, it will open the file "~/.bashrc" in the text editor.
4. Then at the end of the file that is opened in the text editor, add this line:
   

   source /opt/openfoam-1812/etc/bashrc

5. Next, save and close the file.
6. Now, whenever you start a new terminal, it will load the OpenFOAM shell environment automatically. This is because the "~/.bashrc" file is sourced by Bash automatically, which will in turn source OpenFOAM's "/opt/openfoam-1812/etc/bashrc" file.
7. Uh... I forgot to explain before, but the "source" command will run automatically in the current terminal, all of the lines that are inside the script we give it. That is why it's called "source", in the sense that:

   please use the following script as the source code for all of the commands that I want to run next

[RoPr]

I used a text editor Kate, i.e.:


kate ~/.bashrc

This .bashrc file content:


# Sample .bashrc for SuSE Linux
# Copyright (c) SuSE GmbH Nuernberg

# There are 3 different types of shells in bash: the login shell, normal shell
# and interactive shell. Login shells read ~/.profile and interactive shells
# read ~/.bashrc; in our setup, /etc/profile sources ~/.bashrc - thus all
# settings made here will also take effect in a login shell.
#
# NOTE: It is recommended to make language settings in ~/.profile rather than
# here, since multilingual X sessions would not work properly if LANG is over-
# ridden in every subshell.

# Some applications read the EDITOR variable to determine your favourite text
# editor. So uncomment the line below and enter the editor of your choice :-)
#export EDITOR=/usr/bin/vim
#export EDITOR=/usr/bin/mcedit

# For some news readers it makes sense to specify the NEWSSERVER variable here
#export NEWSSERVER=your.news.server

# If you want to use a Palm device with Linux, uncomment the two lines below.
# For some (older) Palm Pilots, you might need to set a lower baud rate
# e.g. 57600 or 38400; lowest is 9600 (very slow!)
#
#export PILOTPORT=/dev/pilot
#export PILOTRATE=115200

test -s ~/.alias && . ~/.alias || true
source /opt/openfoam-1812/etc/bashrc


Then I run a new terminal window and see:

mpicc: command not found
roman@linux-ijwm:~>


Testing with the "simpleFoam -help" command doesn't work:


mpicc: command not found
roman@linux-ijwm:~> simpleFoam -help
simpleFoam: error while loading shared libraries: libmpi.so.12: cannot open shared object file: No such file or directory
roman@linux-ijwm:~>

[wyldckat]

Quick answer: OK, you're close to having it work. Please run the following commands:

mpi-selector --set openmpi
source /etc/profile.d/mpi-selector.sh
source ~/.bashrc
simpleFoam -help

If the last command now gives you a help list instead of complaining about missing MPI, then edit the "~/.bashrc" file and change the last line to this:

source /etc/profile.d/mpi-selector.sh
source /opt/openfoam-1812/etc/bashrc

This way it will load in the Open-MPI into the shell environment, so that OpenFOAM can then use it.

[RoPr]

Hello, dear Bruno Santos. I did everything as you said. But the situation repeats.
This is the end of the file .bashrc now:
.
.

test -s ~/.alias && . ~/.alias || true
source /etc/profile.d/mpi-selector.sh
source /opt/openfoam-1812/etc/bashrc


This is a new terminal window:


mpicc: command not found
roman@linux-ijwm:~> mpi-selector --set openmpi (this is a repeat of my actions)
Defaults already exist; overwrite them? (y/N) y
roman@linux-ijwm:~> source /etc/profile.d/mpi-selector.sh
roman@linux-ijwm:~> source ~/.bashrc
mpicc: command not found
roman@linux-ijwm:~> simpleFoam -help

Usage: simpleFoam [OPTIONS]
Options:
-case <dir> Specify case directory to use (instead of the cwd)
-decomposeParDict <file>
Use specified file for decomposePar dictionary
-dry-run Check case set-up only using a single time step
-dry-run-write Check case set-up and write only using a single time step
-noFunctionObjects
Do not execute function objects
-parallel Run in parallel
-postProcess Execute functionObjects only
-doc Display documentation in browser
-doc-source Display source code in browser
-help Display short help and exit
-help-full Display full help and exit

Steady-state solver for incompressible, turbulent flows.

Using: OpenFOAM-1812 (1812) (see www.OpenFOAM.com)
Build: 1812
Arch: LSB;label=32;scalar=64

roman@linux-ijwm:~> kate ~/.bashrc
roman@linux-ijwm:~>exit



New terminal:
mpicc: command not found
roman@linux-ijwm:~>



... and so on

[wyldckat]

Quick answer: As root, run the following command:

zypper install openmpi-devel

It's the package that is missing and is necessary for mpicc to be installed.

[RoPr]

Hello, dear Bruno Santos. Thanks for your help. I did everything as you said.

Terminal:

mpicc: command not found
roman@linux-ijwm:~> sudo -s
[sudo] пароль для root: 
linux-ijwm:/home/roman # zypper install openmpi-devel
Retrieving repository 'openSUSE:Leap:15.0:Ports' metadata ...............................................................................................................................[error]
Repository 'openSUSE:Leap:15.0:Ports' is invalid.
[http-download.opensuse.org-96515465|http://download.opensuse.org/reposit.../Ports/ports/] Valid metadata not found at specified URL
Please check if the URIs defined for this repository are pointing to a valid repository.
Warning: Skipping repository 'openSUSE:Leap:15.0:Ports' because of the above error.
Some of the repositories have not been refreshed because of an error.
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following 8 NEW packages are going to be installed:
  glibc-devel libibumad3 libstdc++-devel libstdc++6-devel-gcc7 linux-glibc-devel openmpi-devel rdma-core-devel rsocket

8 new packages to install.
Overall download size: 13.6 MiB. Already cached: 0 B. After the operation, additional 53.1 MiB will be used.
Continue? [y/n/...? shows all options] (y): y
.
.
.

In general, the package "openmpi-devel-1.10.7-lp150.9.3.1.x86_64" was installed.
New terminal:

roman@linux-ijwm:~> icoFoam -help

Usage: icoFoam [OPTIONS]
Options:
  -case <dir>       Specify case directory to use (instead of the cwd)
  -decomposeParDict <file>
                    Use specified file for decomposePar dictionary
  -dry-run          Check case set-up only using a single time step
  -dry-run-write    Check case set-up and write only using a single time step
  -noFunctionObjects
                    Do not execute function objects
  -parallel         Run in parallel
  -doc              Display documentation in browser
  -doc-source       Display source code in browser
  -help             Display short help and exit
  -help-full        Display full help and exit

Transient solver for incompressible, laminar flow of Newtonian fluids.

Using: OpenFOAM-1812 (1812) (see www.OpenFOAM.com)
Build: 1812
Arch:  LSB;label=32;scalar=64

It's all good, but others post-compillation steps didn't work:

roman@linux-ijwm:~> foamInstallationTest
Executing /opt/openfoam-1812/bin/foamInstallationTest:


Basic setup :
-------------------------------------------------------------------------------

FATAL ERROR: OpenFOAM environment not configured.

    Please follow the download and installation link in README.html:
    <OpenFOAM installation dir>/OpenFOAM-1812/README.html
    for information on setting-up the OpenFOAM environment.

 roman@linux-ijwm:~> mkdir -p $FOAM_RUN

(Test the installation with a simple tutorial)

 roman@linux-ijwm:~> run
roman@linux-ijwm:~/OpenFOAM/roman-1812/run> cp -r $FOAM_TUTORIALS/incompressible/simpleFoam/pitzDaily ./
cp: failed to perform stat for '/opt/openfoam-1812/tutorials/incompressible/simpleFoam/pitzDaily': There is no such file or directory.
roman@linux-ijwm:~/OpenFOAM/roman-1812/run> cd pitzDaily
bash: cd: pitzDaily: There is no such file or directory.
roman@linux-ijwm:~/OpenFOAM/roman-1812/run> blockMesh
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  1812                                  |
|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 1812 OPENFOAM=1812
Arch   : "LSB;label=32;scalar=64"
Exec   : blockMesh
Date   : Mar 04 2019
Time   : 09:38:43
Host   : linux-ijwm
PID    : 6092
I/O    : uncollated
Case   : /home/roman/OpenFOAM/roman-1812/run
nProcs : 1
trapFpe: Floating point exception trapping enabled (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time



--> FOAM FATAL ERROR: 
cannot find file "/home/roman/OpenFOAM/roman-1812/run/system/controlDict"

    From function virtual Foam::autoPtr<Foam::ISstream> Foam::fileOperations::uncollatedFileOperation::readStream(Foam::regIOobject&, const Foam::fileName&, const Foam::word&, bool) const
    in file global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.C at line 532.

FOAM exiting

roman@linux-ijwm:~/OpenFOAM/roman-1812/run> simpleFoam
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  1812                                  |
|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 1812 OPENFOAM=1812
Arch   : "LSB;label=32;scalar=64"
Exec   : simpleFoam
Date   : Mar 04 2019
Time   : 09:39:05
Host   : linux-ijwm
PID    : 6094
I/O    : uncollated
Case   : /home/roman/OpenFOAM/roman-1812/run
nProcs : 1
trapFpe: Floating point exception trapping enabled (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time



--> FOAM FATAL ERROR: 
cannot find file "/home/roman/OpenFOAM/roman-1812/run/system/controlDict"

    From function virtual Foam::autoPtr<Foam::ISstream> Foam::fileOperations::uncollatedFileOperation::readStream(Foam::regIOobject&, const Foam::fileName&, const Foam::word&, bool) const
    in file global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.C at line 532.

FOAM exiting

Paraview:

roman@linux-ijwm:~/OpenFOAM/roman-1812/run> paraFoam
Cannot use ParaView reader module library (PVFoamReader)
The PV_PLUGIN_PATH environment value is not set

Continuing with builtin reader:  paraFoam -vtk

Created temporary 'run.foam'
/opt/openfoam-1812/bin/paraFoam: line 324: paraview: command not found
roman@linux-ijwm:~/OpenFOAM/roman-1812/run>

"Paraview" is also not installed, although I thought it was included.

[wyldckat]

Quick answers:

1. I believe you can ignore what foamInstallationTest states, given that this was an RPM based installation, which should be fully operational and no further testing should be needed.
2. Now I see mixed results in what you've gotten... Oh, I see, the problem is that there are additional packages that need to be installed... Here is a list of the packages to be installed to get everything from OpenFOAM:
   

   zypper install openfoam1812 openfoam1812-doc openfoam1812-examples openfoam1812-modules openfoam-selector

   In your case, you are missing the package "openfoam1812-examples".

[RoPr]

Thank you very much! OpenFOAM works. In spite of the fact that in the /opt directory there are files associated with ParaVIEW, it doesn't start from the shell:

.
.
.
SIMPLE solution converged in 283 iterations

streamLine streamlines write:
    seeded 10 particles
    Tracks:10
    Total samples:10885
    Writing data to "/home/roman/OpenFOAM/roman-1812/run/pitzDaily/postProcessing/sets/streamlines/283"
End

roman@linux-ijwm:~/OpenFOAM/roman-1812/run/pitzDaily> paraFoam
Cannot use ParaView reader module library (PVFoamReader)
The PV_PLUGIN_PATH environment value is not set

Continuing with builtin reader:  paraFoam -vtk

Created temporary 'pitzDaily.foam'
/opt/openfoam-1812/bin/paraFoam: line 324: paraview: command not found
roman@linux-ijwm:~/OpenFOAM/roman-1812/run/pitzDaily>

[wyldckat]

As mentioned in the original page you pointed to, the idea is to use the Scotch and ParaView RPM packages that already exist in the Science repository.
Since Scotch is installed automatically along with OpenFOAM (I think it is...), then you just need to install ParaView manually:

zypper install paraview

However, this also means that it will not have OpenFOAM's own reader and will instead rely on ParaView's builtin reader.

[RoPr]

Thank you very much. ParaVIEW has been successfully installed, but it run with the following comments:


roman@linux-ijwm:~/OpenFOAM/roman-1812/run/pitzDaily> paraFoam
Cannot use ParaView reader module library (PVFoamReader)
The PV_PLUGIN_PATH environment value is not set

Continuing with builtin reader: paraFoam -vtk

Created temporary 'pitzDaily.foam'

It's important? Because the visualization of tutorial simple calculations was successful. If I run the program with the help of the paraview command, the calculation results cannot be read:


roman@linux-ijwm:~/OpenFOAM/roman-1812/run/pitzDaily> paraview
File ' "/home/roman/OpenFOAM/roman-1812/run/pitzDaily/pitzDaily.foam" ' cannot be read.
ERROR: In /home/abuild/rpmbuild/BUILD/ParaView-v5.6.0/VTK/Common/ExecutionModel/vtkExecutive.cxx, line 782
vtkPVCompositeDataPipeline (0x562dc76ef160): Algorithm vtkAMReXParticlesReader(0x562dc7543ff0) returned failure for request: vtkInformation (0x562dc76f7e40)
Debug: Off
Modified Time: 220506
Reference Count: 1
Registered Events: (none)
Request: REQUEST_INFORMATION
ALGORITHM_AFTER_FORWARD: 1
FORWARD_DIRECTION: 0



Can I ask any questions on this forum about settings of interaction between OpenFOAM and external pre- and post-processors (for example, SALOME, which include ParaVIEW)?

[wyldckat]

Quick answers:

1. ParaView can only open a file that exists. From the error message that you posted, I guess that the file didn't exist when you tried to open it in ParaView?
   1. If you run:
      

      paraFoam -help

      you'll get additional information.
   2. If you run:
      

      paraFoam -vtk -touch

      it will create the ".foam" file for your case, which you can then open manually in ParaView.
2. Where to ask questions related to OpenFOAM is explained here, which outlines the map of the forum: Map of the OpenFOAM Forum - Understanding where to post your questions!

[RoPr]

Thank you very much!

[FM_Stiral]

Hello everybody,
This thread is very interesting, I had the same problems as RoPr.

Unfortunately, I have still problem when I want to install openfoam doc, examples, modules and selector. It seems the deposit 'openSUSE:LEAP:15.1:ARM' is not valid.


Does everyone know if there is a problem on servers? Is it due to the openSUSE version (15.1 instead of 15.0 in this thread). I don't have found a specific user guide to install openfoam on openSUSE15.1.


Thank you for your help.

[mdhfiz]

Hello Stiral!

There’s probably nothing wrong with your repos. the rsync server is down as indicated by opensuse in their website. you can wait till it is fixed.

The science repo is working for me though, you should able to install the openfoam-xxxx

[Ashuthosh]

Originally Posted by RoPr

I used a text editor Kate, i.e.:


kate ~/.bashrc

This .bashrc file content:


# Sample .bashrc for SuSE Linux
# Copyright (c) SuSE GmbH Nuernberg

# There are 3 different types of shells in bash: the login shell, normal shell
# and interactive shell. Login shells read ~/.profile and interactive shells
# read ~/.bashrc; in our setup, /etc/profile sources ~/.bashrc - thus all
# settings made here will also take effect in a login shell.
#
# NOTE: It is recommended to make language settings in ~/.profile rather than
# here, since multilingual X sessions would not work properly if LANG is over-
# ridden in every subshell.

# Some applications read the EDITOR variable to determine your favourite text
# editor. So uncomment the line below and enter the editor of your choice :-)
#export EDITOR=/usr/bin/vim
#export EDITOR=/usr/bin/mcedit

# For some news readers it makes sense to specify the NEWSSERVER variable here
#export NEWSSERVER=your.news.server

# If you want to use a Palm device with Linux, uncomment the two lines below.
# For some (older) Palm Pilots, you might need to set a lower baud rate
# e.g. 57600 or 38400; lowest is 9600 (very slow!)
#
#export PILOTPORT=/dev/pilot
#export PILOTRATE=115200

test -s ~/.alias && . ~/.alias || true
source /opt/openfoam-1812/etc/bashrc


Then I run a new terminal window and see:

mpicc: command not found
roman@linux-ijwm:~>


Testing with the "simpleFoam -help" command doesn't work:


mpicc: command not found
roman@linux-ijwm:~> simpleFoam -help
simpleFoam: error while loading shared libraries: libmpi.so.12: cannot open shared object file: No such file or directory

Originally Posted by RoPr

roman@linux-ijwm:~>

Just leaving another solution for anyone else that comes across the same problem. So basically I continued getting the mpicc: command not found even after installing the recommended mpi packages. So I ended up making the following changes to the bashrc file located at $WM_PROJECT_DIR/etc/bashrc

export WM_MPLIB=SYSOPENMPI
to

export WM_MPLIB=OPENMPI

This enables Openfoam to use the built in libraries as oposed to the one installed in the system.


OpenFoam2012 (from the science repository) on openSUSE Tumbleweed.

[olesen]

Originally Posted by Ashuthosh

export WM_MPLIB=SYSOPENMPI

to

export WM_MPLIB=OPENMPI

This enables Openfoam to use the built in libraries as oposed to the one installed in the system.

OpenFoam2012 (from the science repository) on openSUSE Tumbleweed.

This is not only pretty strange, it is also not what I would recommend changing at all.
I don't know how exactly you have sourced things but normally, the mpicc command will not even be needed. During the RPM build, an additional file (etc/config.sh/prefs.sys-openmpi) is generated. It will have this type of content:

# etc/config.sh/prefs.sys-openmpi
#
# Packaging configured value for sys-openmpi
export MPI_ARCH_PATH="/usr/lib64/mpi/gcc/openmpi2"
#----

The exact location pointed to by MPI_ARCH_PATH will vary, depending on the opensuse version (older versions had ..../gcc/openmpi - ie, openmpi version1).


If this path is missing, or incorrect that could explain your problem. Only in that case does it actually use the mpicc command to determine paths. If mpicc is actually setup for you will depend on what you have done (or not) with the mpi-selector command in opensuse.


It is worth taking a further dig to see what has gone wrong. Simply changing the entry to "OPENMPI" like you have done indicates that you expect to be using openmpi from a ThirdParty installation that doesn't exist.
While your quick solution does remove the warning about not finding mpicc, you are unlikely to have much joy if you try to run anything in parallel. You will get the dummy stubs that all essentially emit error messages only.

[Ashuthosh]

You are right. Although I was able to remove the error message, it didn't actually solve the problem. I verified this by running a test parallel case.
What I did initially was based off of what I read here. (pg. 10)


I reverted the changes I made and used the mpi-selector to choose openmpi2. My prefs.sys-openmpi file is identical to yours. But now when I run this case I get the following error:


[hal9000:03673] *** An error occurred in MPI_Init_thread
[hal9000:03673] *** on a NULL communicator
[hal9000:03673] *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
[hal9000:03673] *** and potentially your MPI job)
[hal9000:03674] *** An error occurred in MPI_Init_thread
[hal9000:03674] *** on a NULL communicator
[hal9000:03674] *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
[hal9000:03674] *** and potentially your MPI job)
[hal9000:03675] *** An error occurred in MPI_Init_thread
[hal9000:03675] *** on a NULL communicator
[hal9000:03675] *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
[hal9000:03675] *** and potentially your MPI job)
[hal9000:03672] *** An error occurred in MPI_Init_thread
[hal9000:03672] *** on a NULL communicator
[hal9000:03672] *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
[hal9000:03672] *** and potentially your MPI job)
[hal9000:03672] Local abort before MPI_INIT completed completed successfully, but am not able to aggregate error messages, and not able to guarantee that all other processes were killed!
[hal9000:03673] Local abort before MPI_INIT completed completed successfully, but am not able to aggregate error messages, and not able to guarantee that all other processes were killed!
[hal9000:03674] Local abort before MPI_INIT completed completed successfully, but am not able to aggregate error messages, and not able to guarantee that all other processes were killed!
[hal9000:03675] Local abort before MPI_INIT completed completed successfully, but am not able to aggregate error messages, and not able to guarantee that all other processes were killed!
^C
[1]+ Exit 1 mpirun -np 4 interFoam -parallel > log.interFoam




I would really appreciate some help.


Edit: After a bit of tinkering, I've switched to a Debian based distribution and everything just works at the moment. I'll get back to this thread when I go back to tumbleweed in the future.