|June 25, 2015, 06:28||
How to perfom named selection?
Join Date: Jun 2015
Posts: 11Rep Power: 3
First of all I am a silent reader for years now and this forum has helped a lot! so thanks for this
Till now i have have worked with Ansys Workbench, but lately i am forced to work with openfoam and that realy makes my head spinn
for training i made an STL file of a pipe and i want to simulate the flow trough it.
to my problem:
how do i part the model in different regions or facets? in Ansys it was just selecting all the faces you want, right click and then name it like inlet or whatever you want it to be.
how do you guys do it? I have tried using Salome and FreeCAD but i dont get it.
thanks for your help!
|August 20, 2015, 16:39||
Join Date: Mar 2010
Posts: 153Rep Power: 8
some time ago I was facing the same problems, after I figured out how to do it in Salome I answered a similar question in another thread: http://www.cfd-online.com/Forums/ope...y-patches.html
You should also have a look at the tools surfaceAutoPatch and surfaceSplitByPatch.
Feel free to ask follow-up questions if that's not enough. Good luck!
|facets, patches, stl mesh|
|Thread||Thread Starter||Forum||Replies||Last Post|
|y+ and u+ values with low-Re RANS turbulence models: utility + testcase||florian_krause||OpenFOAM||110||April 21, 2016 11:54|
|Native ParaView Reader Bugs||tj22||OpenFOAM Paraview & paraFoam||270||January 4, 2016 12:39|
|Near wall treatment in k-omega SST||Arnoldinho||OpenFOAM Running, Solving & CFD||37||June 9, 2015 09:35|
|Creating named selection for a line sketch||amir00251||ANSYS||6||July 31, 2012 08:02|
|Problem with compile the setParabolicInlet||ivanyao||OpenFOAM Running, Solving & CFD||6||September 5, 2008 20:50|