OpenFOAM Meshing & Mesh Conversion

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 60 of 146 « First < 10 50 58 59 60 61 62 70 110 > Last »

Threads in Forum : OpenFOAM Meshing & Mesh Conversion

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: [snappyHexMesh] About snappyHexMesh ( 1 2 3) wyldckat	August 10, 2023 03:22 by H_SheikhShoaie	41	15,184
		Sticky: [blockMesh] About blockMesh wyldckat	September 30, 2022 23:10 by yzj	5	8,930
		Sticky: [Commercial meshers] About the Commercial and Closed Source Meshers discussed here wyldckat	July 22, 2020 22:09 by fumiya	3	8,283
		Sticky: [CAD formats] Creating waterproof STL using snappyHexMesh or salome ( 1 2 3) Tobi	May 13, 2020 06:01 by otaolafr	58	32,668
		Sticky: About the Open Source Meshers discussed here wyldckat	June 5, 2019 04:52 by Enrico Segre	3	10,796
		Sticky: Map of this Meshing (sub-)Forum wyldckat	April 27, 2019 09:33 by wyldckat	0	5,172
		Sticky: cfMesh: Please read this wyldckat	December 30, 2017 19:11 by wyldckat	0	7,390
		[Other] Cut the connection between The Mesh\Geometry and setField alinuman15	September 13, 2017 07:15 by alinuman15	3	808
		[snappyHexMesh] Regarding SnappyMesh and Stl file naik1991	September 13, 2017 06:00 by naik1991	10	1,694
		[blockMesh] Why aren't arcs showing in this mesh? Thewitness	September 13, 2017 02:07 by freuen	4	980
		[Other] How to do WRF + OpenFoam coupling? sarath.rajk	September 11, 2017 09:28 by DominicTNC	1	2,647
		[blockMesh] Blockmesh, patches vs boundry Ursmooth	September 10, 2017 09:44 by Ursmooth	0	723
		[snappyHexMesh] Meshing a very thin meatus with SnappyHexMesh ( 1 2) enginpower	September 9, 2017 03:46 by kandelabr	29	6,371
		[Gmsh] Residual not dropping for my mesh. Want to implement boundary layer on surface. Manideep Reddy	September 7, 2017 12:56 by tareqkh	1	837
		[snappyHexMesh] How to snappyHexMesh an angle please? sitajeje	September 7, 2017 02:35 by sitajeje	4	1,645
		[Other] gap between layers and model xuankushuocai	September 3, 2017 19:05 by xuankushuocai	0	681
		[snappyHexMesh] bounding box: searchableType student666	September 2, 2017 16:46 by TerenceA	2	4,062
		[snappyHexMesh] How to run snappyHexMesh zone refinement afterwards hxaxtma	September 1, 2017 01:21 by a_slow_old_man	2	1,044
		[snappyHexMesh] Meshing in different stages and Successive refinement rbaCFD	September 1, 2017 01:00 by a_slow_old_man	1	766
		[snappyHexMesh] SnappyHexMesh crashes if nRelaxIter>0 kishore96	August 31, 2017 07:42 by kishore96	11	1,857
		[Other] Wall functions on small models kandelabr	August 30, 2017 17:14 by kandelabr	0	732
		[snappyHexMesh] SnappyHexMesh refuses to refine certain edges TomP	August 30, 2017 10:19 by Shadab	14	10,538
		[snappyHexMesh] SnappyHexMesh castellation stage creates hole in surface where mesh flows into domain Dav3dum	August 30, 2017 04:19 by Dav3dum	0	961
		[snappyHexMesh] defining non-cubic blocks to toposet sarajamali	August 29, 2017 09:41 by sarajamali	4	1,170
		[Other] import NOZZLE mesh from tecplot to OpenFoam mm1993	August 27, 2017 17:56 by mm1993	2	1,445
		[mesh manipulation] stitchMesh: multiple meshes GerhardHolzinger	August 25, 2017 12:43 by saddy	3	3,533
		[Other] Meshing sharp edges kandelabr	August 25, 2017 09:02 by kandelabr	1	951
		[snappyHexMesh] SnappyHexMesh Problem with edge matching andersking	August 24, 2017 02:32 by sitajeje	13	7,108
		[snappyHexMesh] Problem with decomposePar, snappyHexMesh luca1992	August 23, 2017 19:06 by luca1992	12	3,278
		[snappyHexMesh] Problem and doubts with blockMesh, snappyHexMesh and multiple geometry luca1992	August 23, 2017 11:40 by luca1992	0	1,125
		[snappyHexMesh] extrudeMesh but retain sourcePatch as faceZone jfw_cfd	August 23, 2017 04:59 by ElenaVM	2	2,748
		[blockMesh] Why is this creating a block and not a cylinder? Thewitness	August 22, 2017 22:58 by Thewitness	3	994
		[Other] How to setup Dynamic Mesh with 6DOF, detach/attach, and new blocks? Joe Wang	August 22, 2017 16:59 by Joe Wang	4	1,324
		[snappyHexMesh] Small domains in multi-region SnappyHexMesh nusivares	August 22, 2017 10:14 by Tobi	3	1,245
		[Gmsh] Gmsh - External Flow Mesh Generation - Airfoil STL file Eefoe	August 22, 2017 09:27 by RKyle	2	2,474
		[snappyHexMesh] use toposetdict to dlete cylinder from cuboid saddy	August 21, 2017 15:06 by saddy	1	1,006
		[snappyHexMesh] How to calculate a Volume of all Cells after using snappyHexMesh joaquindelpino	August 21, 2017 10:15 by joaquindelpino	4	1,836
		[Other] Changing from Fill Bottle to Rinse Bottle anraw	August 21, 2017 07:03 by me12p1006	3	1,116
		[Other] OpenFOAM to Z88 mesh mturcios777	August 18, 2017 12:21 by mturcios777	2	1,887
		[Other] Cylinder using snappyHex andrei.cimpoeru	August 16, 2017 06:31 by andrei.cimpoeru	0	726
		[snappyHexMesh] snappyHexMesh large parallel case crash C-L	August 15, 2017 09:40 by C-L	0	984
		[Other] engineFoam: unstable velocity field mmeyer	August 11, 2017 07:55 by zhouqy1994	8	1,683
		[Gmsh] GMSH: Meshing a cylinder with a HUGE number of points HelplessWanderer	August 10, 2017 14:17 by alexeym	1	1,271
		[Gmsh] Gmsh: Structured Mesh problems skrishnamoorthy	August 9, 2017 22:48 by arungovindneelan	3	4,924
		[blockMesh] Why does this mesh crash? Thewitness	August 6, 2017 22:07 by Antimony	5	1,030
		[mesh manipulation] refineMesh: command not found bar	August 6, 2017 10:29 by bar	1	1,043
		[mesh manipulation] Is it possible to coarsen the mesh? cheng1988sjtu	August 2, 2017 22:59 by Antimony	4	2,825

Read this first: How to ask a question on the forums

Page 60 of 146 « First < 10 50 58 59 60 61 62 70 110 > Last »

Display Options

Showing threads 2361 to 2400 of 5834

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning Prefix (any prefix) (no prefix) [blockMesh] [CAD formats] [CGNS] [Commercial meshers] [foamyMesh] [Gmsh] [mesh manipulation] [Netgen] [Salome] [snappyHexMesh] [surface handling] [Technical] [Other]

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules