OpenFOAM Meshing & Mesh Conversion

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 80 of 146 « First < 30 70 78 79 80 81 82 90 130 > Last »

Threads in Forum : OpenFOAM Meshing & Mesh Conversion

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: [snappyHexMesh] About snappyHexMesh ( 1 2 3) wyldckat	August 10, 2023 03:22 by H_SheikhShoaie	41	15,212
		Sticky: [blockMesh] About blockMesh wyldckat	September 30, 2022 23:10 by yzj	5	8,937
		Sticky: [Commercial meshers] About the Commercial and Closed Source Meshers discussed here wyldckat	July 22, 2020 22:09 by fumiya	3	8,298
		Sticky: [CAD formats] Creating waterproof STL using snappyHexMesh or salome ( 1 2 3) Tobi	May 13, 2020 06:01 by otaolafr	58	32,732
		Sticky: About the Open Source Meshers discussed here wyldckat	June 5, 2019 04:52 by Enrico Segre	3	10,810
		Sticky: Map of this Meshing (sub-)Forum wyldckat	April 27, 2019 09:33 by wyldckat	0	5,180
		Sticky: cfMesh: Please read this wyldckat	December 30, 2017 19:11 by wyldckat	0	7,398
		[snappyHexMesh] Refinement at wrong stage in SnappyHexMesh james.conger	November 18, 2015 20:03 by james.conger	1	853
		[Gmsh] Axisymmetric model from STEP in GMSH eric.m.tridas	November 18, 2015 05:24 by PERACHISELVI	7	5,279
		[mesh manipulation] allow only primitive cell shapes in refineMesh ganeshv	November 17, 2015 10:17 by cutter	1	1,200
		[blockMesh] Where can we find more details about blockMesh's algoritms? usv001	November 17, 2015 07:45 by kalle	4	1,056
		[snappyHexMesh] snappyHexMesh runs endless - I need general advise TeresaT	November 17, 2015 02:50 by TeresaT	5	1,435
		[blockMesh] Cannot view arc edge in ParaView erlendg	November 14, 2015 11:22 by iper88	5	2,348
		[blockMesh] How to merge blocks? Match, merge or stitch? gerritgroot	November 13, 2015 20:59 by gerritgroot	0	2,574
		[Technical] Order of points in a boundary patch camille.yvin	November 11, 2015 10:31 by nitishanand1989	8	11,972
		[blockMesh] Buice 2D asymetric diffuser canopus	November 11, 2015 08:59 by linnemann	2	1,681
		[Other] Is there a native way to produce non-hex meshes? And what are their uses? phandy	November 10, 2015 10:16 by phandy	0	710
		[snappyHexMesh] Snappy creates a bumpy surface swin-joe	November 9, 2015 06:20 by swin-joe	5	1,078
		[snappyHexMesh] On which patches to set BC's for snappyHexMesh ? Talder	November 8, 2015 18:25 by Talder	0	1,114
		[blockMesh] Unwanted internal Mesh in OpenFOAM, using blockMesh nitishanand1989	November 7, 2015 12:43 by nitishanand1989	1	893
		[snappyHexMesh] Problem in layer addition at complex/bend shapes vineet_bhola	November 6, 2015 09:48 by vineet_bhola	0	829
		[mesh manipulation] Rotate a mesh fabrizio	November 6, 2015 05:20 by mar001	4	4,624
		[blockMesh] circular plate mesh with cyclic blackbow	November 6, 2015 05:05 by blackbow	0	1,234
		[snappyHexMesh] SnappyHexMesh in Parallel problem swifty	November 6, 2015 04:40 by jaydeepKhajure	10	5,982
		[Commercial meshers] mesh conversion from ansys mesher to openfoam Dusan1224	November 5, 2015 03:41 by Dusan1224	2	1,225
		[blockMesh] Principle/maths behind blockMesh usv001	November 3, 2015 11:12 by usv001	0	995
		[Other] How to use finite area method in official OpenFOAM 2.2.0? Detian Liu	November 3, 2015 03:04 by sarbi	4	2,925
		[snappyHexMesh] SnappyHexMesh development? Tobi	November 2, 2015 16:54 by Tobi	2	1,276
		[blockMesh] Perforated plate base Al-Akaishi	November 2, 2015 05:48 by Al-Akaishi	0	944
		[blockMesh] Adjacent cells are disjunct after blockMesh run NablaDyn	October 28, 2015 07:15 by NablaDyn	1	1,041
		[Other] makeAxialMesh for OpenFoam-2.0.0 mechy	October 27, 2015 10:14 by Antony_Bosco	19	5,722
		[snappyHexMesh] snappyHexMesh removes wrong cells pela145	October 27, 2015 06:39 by pela145	3	1,103
		[Other] no snapping to features Duncan_vdH	October 26, 2015 09:12 by Duncan_vdH	0	953
		[mesh manipulation] Best way to merge this two mesh efirvida	October 25, 2015 22:54 by efirvida	0	1,099
		[Gmsh] GmshTo Foam Warning vitocorleone	October 24, 2015 11:51 by vitocorleone	2	1,248
		[Gmsh] Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan	October 22, 2015 11:05 by KateEisenhower	3	28,107
		[snappyHexMesh] SHM addLayers problem: boundary layers collapsing on a patch DOFuser	October 22, 2015 08:09 by kishpishar	1	1,777
		[blockMesh] About the arc in blockMesh ce73stargazer	October 22, 2015 03:40 by nimasam	1	1,703
		[Other] Recommendation about Meshers ce73stargazer	October 21, 2015 21:26 by ce73stargazer	0	1,005
		[Other] Meshing curved geometry zannatul	October 21, 2015 18:59 by zannatul	1	1,381
		[mesh manipulation] mirrorMesh and undoing the joining of patches chegdan	October 21, 2015 08:09 by KateEisenhower	3	8,116
		[mesh manipulation] Cyclic BC how to obtain exact same meshes? ( 1 2) gelbebanane	October 20, 2015 15:16 by KateEisenhower	22	4,967
		[snappyHexMesh] snappy in 2.5 D molekel	October 17, 2015 18:21 by vatavuk	3	933
		[blockMesh] problem on meshing cylinder on a surface kuro	October 17, 2015 02:00 by kuro	0	821
		[snappyHexMesh] snappyhexmesh of a reactor schlingl	October 16, 2015 11:03 by Saideep	2	1,049
		[Other] Problem with patches/cells on edge with multi-region mesh vineet_bhola	October 16, 2015 03:34 by vineet_bhola	5	1,068
		[Other] Porous media modelling in OpenFOAM poros	October 15, 2015 06:04 by poros	0	1,063

Read this first: How to ask a question on the forums

Page 80 of 146 « First < 30 70 78 79 80 81 82 90 130 > Last »

Display Options

Showing threads 3161 to 3200 of 5836

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning Prefix (any prefix) (no prefix) [blockMesh] [CAD formats] [CGNS] [Commercial meshers] [foamyMesh] [Gmsh] [mesh manipulation] [Netgen] [Salome] [snappyHexMesh] [surface handling] [Technical] [Other]

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules