patchAverage on slurm cluster

hellsign48 · February 5, 2020, 05:43

I'm using old version of OF so patchAverage works on my work station with no problems:

Quote:

patchAverage p bottom > pressure.txt

however when I do the same on cluster it gives no results and just makes an empty file. Does anyone know if it should be done different way on clusters?

agustinvo · February 5, 2020, 08:11

When you run patchAverage in you local workstation, is the case decomposed or not? And what about in the slurm cluster?

If you are running the command in decomposed timeSteps, the problem might come up from there.

hellsign48 · February 5, 2020, 08:15

In both cases it's in reconstructed case. I'm also not getting any error message or complain. It does something for couple of seconds but doesn't give any output (on cluster).

JNSN · February 10, 2020, 16:57

Are you running with srun command?

hellsign48 · February 11, 2020, 03:41

I tried ruining it with sbatch and also with just patchAverage in terminal. Still no luck.

JNSN · February 11, 2020, 06:19

With 'in terminal ' you mean outside slum? No interactive console?

hellsign48 · February 11, 2020, 06:55

Yes I meant outside slurm. This way I use roconstructPar without any problems.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FSI simulation in SLURM cluster (input file and script)	Lara Gonçales	Structural Mechanics	0	January 20, 2020 15:45
FSI coupling simulation in SLURM Cluster	Claudio.M	ANSYS	1	January 7, 2019 00:49
[Other] Basic questions about OpenFOAM cluster running and installing	Fauster	OpenFOAM Installation	0	May 25, 2018 15:00
SAP cluster resource/services not coming online on cluster node 2	Nthar1@yahoo.com	Hardware	0	May 9, 2017 05:55
Why not install cluster by connecting workstations together for CFD application?	Anna Tian	Hardware	5	July 18, 2014 14:32

February 5, 2020, 08:11		#2
agustinvo Senior Member Agustín Villa Join Date: Apr 2013 Location: Alcorcón Posts: 313 Rep Power: 15	When you run patchAverage in you local workstation, is the case decomposed or not? And what about in the slurm cluster? If you are running the command in decomposed timeSteps, the problem might come up from there.

February 5, 2020, 08:15		#3
hellsign48 New Member Join Date: Feb 2020 Posts: 6 Rep Power: 6	In both cases it's in reconstructed case. I'm also not getting any error message or complain. It does something for couple of seconds but doesn't give any output (on cluster).

February 10, 2020, 16:57		#4
JNSN Senior Member Jan Join Date: Jul 2009 Location: Hamburg Posts: 137 Rep Power: 19	Are you running with srun command?

February 11, 2020, 03:41		#5
hellsign48 New Member Join Date: Feb 2020 Posts: 6 Rep Power: 6	I tried ruining it with sbatch and also with just patchAverage in terminal. Still no luck.

February 11, 2020, 06:19		#6
JNSN Senior Member Jan Join Date: Jul 2009 Location: Hamburg Posts: 137 Rep Power: 19	With 'in terminal ' you mean outside slum? No interactive console?

February 11, 2020, 06:55		#7
hellsign48 New Member Join Date: Feb 2020 Posts: 6 Rep Power: 6	Yes I meant outside slurm. This way I use roconstructPar without any problems.