|
[Sponsors] |
January 23, 2024, 10:41 |
CellType issues when using overset
|
#1 |
Member
Ilan
Join Date: Dec 2018
Posts: 52
Rep Power: 7 |
Hello Foamers !
I need some advice for one of my mesh. I am trying to simulate a donut floating platform around a pile. The motion of the donut has a big amplitude so I decided to use an overset mesh. My problem is that usually, when I use an averset mesh I have no problem to define the celltypes. But here I have troubles to identify the region between the floating platform and the pile. One the screenshots, blue and red are cell zones (background and overset) Usually when I apply the celltype, using the setfield function, I get the entire fluid zone under number 0 in paraFoam but in this case, the region between the floating part and the pile is concidered as a solid part. Does any of you have an idea of how to solve this ? I can share some files if necessary. Thank you, |
|
Tags |
celltype, overset |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dynamic overset meshes issues with overInterDyMFoam | Antoine_faye | OpenFOAM Running, Solving & CFD | 1 | February 7, 2023 08:33 |
2DOF Planning hull resistance study with overset | CFD_fan | OpenFOAM Running, Solving & CFD | 7 | July 13, 2021 05:03 |
Overset cellType issue | MadsR | OpenFOAM Pre-Processing | 0 | March 17, 2021 05:56 |
Overset mesh motion issues | astrotoma | STAR-CCM+ | 2 | March 30, 2020 03:13 |
Residual Convergence Issues with Overset Meshing? | Dan709 | STAR-CCM+ | 4 | May 3, 2017 18:06 |