Simulate droplet impact on deep liquid pools using interFoam

LearningNotes · March 19, 2020, 17:21

Hi CFDers,

Background intro pic:

I'm doing CFD via openFOAM to simulate Rayleigh jet formation. However, I cannot get Jet formation.

Case Setup from Github:https://github.com/xixihaha1995/drop...Surface_impact

Simulation Results from Google Drive:https://drive.google.com/open?id=1E5...bXxE7wW98BqOmk

Existing similar simulation:
Gao, Fei. "Numerical simulation of the droplet-surface impact using interFoam." (2016).

Reference Paper:
Castillo-Orozco, Eduardo, et al. "Droplet impact on deep liquid pools: Rayleigh jet to formation of secondary droplets." Physical Review E 92.5 (2015): 053022.

In case you couldn't open link, here is the big picture of my openFOAM setup:
blockMesh: 0.04 meter/400 cells
interFoam solver: RAS, k-epsilon

startTime 0;
stopAt endTime;
endTime 0.003;
deltaT 0.00003;

Thank you!
Stay healthy!

Anik122 · July 6, 2020, 05:34

Every thing is right basically you have set the droplet position in the wrong position.

March 19, 2020, 17:21	Simulate droplet impact on deep liquid pools using interFoam	#1
LearningNotes New Member It is Ok Join Date: Dec 2019 Posts: 1 Rep Power: 0	Hi CFDers, Background intro pic: I'm doing CFD via openFOAM to simulate Rayleigh jet formation. However, I cannot get Jet formation. Case Setup from Github:https://github.com/xixihaha1995/drop...Surface_impact Simulation Results from Google Drive:https://drive.google.com/open?id=1E5...bXxE7wW98BqOmk Existing similar simulation: Gao, Fei. "Numerical simulation of the droplet-surface impact using interFoam." (2016). Reference Paper: Castillo-Orozco, Eduardo, et al. "Droplet impact on deep liquid pools: Rayleigh jet to formation of secondary droplets." Physical Review E 92.5 (2015): 053022. In case you couldn't open link, here is the big picture of my openFOAM setup: blockMesh: 0.04 meter/400 cells interFoam solver: RAS, k-epsilon startTime 0; stopAt endTime; endTime 0.003; deltaT 0.00003; Thank you! Stay healthy! Anik122 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using Fluent to simulate droplet impact	Jay	FLUENT	4	May 27, 2016 00:08
Droplet Falling using interFoam	Cara Gao	OpenFOAM Running, Solving & CFD	14	August 24, 2015 21:47
Artificial high pressure under an impacting droplet using interFoam	hadisafaei	OpenFOAM Running, Solving & CFD	4	November 30, 2014 16:06
liquid droplet	Jason Wang	CFX	2	May 1, 2008 12:40
Liquid fueled Droplet Evaporation	Ray	FLUENT	8	January 3, 2007 00:36

July 6, 2020, 05:34		#2
Anik122 New Member Anik Sarker Join Date: Oct 2017 Location: Dhaka, Bangladesh Posts: 8 Rep Power: 8	Every thing is right basically you have set the droplet position in the wrong position.