|
[Sponsors] |
two-phase flow simulation through a porous media |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 11, 2022, 06:41 |
two-phase flow simulation through a porous media
|
#1 |
New Member
Graciella
Join Date: Sep 2022
Posts: 4
Rep Power: 3 |
Hi everyone, I am relatively new to OpenFOAM and I have tried with no success to pass a flow through a fibrous material I generated. I looked up this forum and other sources to get to where I am now using OpenFOAM. I meshed the pore space of the fibrous structure to Simulate flow and the flow seems to stop at the inlet. Someone checked it out on paraview and adjusted my velocity scale and it looked like there was flow.
However, I did surfaceCheck and can see that for the fibre, the surface is not closed. Could this affect it? https://files.slack.com/files-pri/TJ...A56Y/image.png |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2Phase flow simulation in Porous Media Ansys Fluent | Yaqub | FLUENT | 0 | June 22, 2017 03:46 |
Two phase flow through porous media | cshah4u | ANSYS | 0 | June 22, 2010 07:05 |
Porous media flow with diffusion | albertinho | OpenFOAM | 0 | March 31, 2010 17:14 |
reg Porous two phase flow simulation | chittoorreddy | STAR-CCM+ | 1 | December 21, 2009 05:37 |
porous media: Fluent or Star-CD? | Igor | Main CFD Forum | 0 | December 5, 2002 15:16 |