|
[Sponsors] |
January 15, 2020, 09:25 |
Face duplicate repair
|
#1 |
New Member
Alvin Wahracha
Join Date: Jan 2020
Posts: 1
Rep Power: 0 |
Hi guys,
I am new user of STAR-CCM+. So I'm trying to analyse a mass transfer flow inside of the engine, by trying to import my model from CAD. However, I can't get it meshed somehow. It says that I have to repair the duplicate surface |
|
January 21, 2020, 00:46 |
|
#2 |
New Member
gago
Join Date: Jul 2019
Location: Turkey
Posts: 9
Rep Power: 6 |
Hello,
You need to open the whole surface in surface repair and check the surface errors. You would see some pierced faces and you should handle them manually until you have error free clean surface. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Invalid Normals for source face to target face while making AMI? | Sorabh | OpenFOAM Meshing & Mesh Conversion | 1 | August 3, 2021 06:35 |
Be careful when calling meshSearch::findNearestFace with a seed face | t.oliveira | OpenFOAM Programming & Development | 0 | September 6, 2018 08:38 |
[blockMesh] Errors during blockMesh meshing | Madeleine P. Vincent | OpenFOAM Meshing & Mesh Conversion | 51 | May 30, 2016 10:51 |
[blockMesh] non-orthogonal faces and incorrect orientation? | nennbs | OpenFOAM Meshing & Mesh Conversion | 7 | April 17, 2013 05:42 |
channelFoam for a 3D pipe | AlmostSurelyRob | OpenFOAM | 3 | June 24, 2011 13:06 |