 |
 |
 |
|
|
|
[Sponsors] | ||||
Star- CCM: 2D H- Rotor performance simulation problem |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 7, 2021, 19:26
|
Star- CCM: 2D H- Rotor performance simulation problem
|
#1 |
|
New Member
Yi Xiang Guice
Join Date: Sep 2021
Posts: 6
Rep Power: 4  |
Hi there, I am currently simulating a 2D H-Rotor (or darreus rotor) in Star- CCM. The setup is as below:
https://imgur.com/a/OV4WTVy I am not sure why the moment coefficient only increases exponentially along with increasing TSR. Following is the mesh setup: https://imgur.com/a/hCnih2J And the result I obtained is below: https://imgur.com/a/KDvLFhH Any help will be appreciated. Thanks a lot. |
|
|
|
|
|
| Tags |
| overset mesh, wind turbine |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Virtual wave problem at ship calm water simulation | xdo2004 | STAR-CCM+ | 1 | March 20, 2020 23:19 |
| SU2-7.0.1 on ubuntu 18.04 | hyunko | SU2 Installation | 7 | March 16, 2020 04:37 |
| Star CCM Launching problem | amiripa | STAR-CCM+ | 5 | May 2, 2012 18:59 |
| CFD-analysis of hydroplane: STAR CCM or Flow Simulation? | peterg07 | Main CFD Forum | 0 | February 7, 2010 14:32 |
| Star CCM - Problem with image hardcopy quality | James | Siemens | 2 | March 14, 2007 02:36 |
Linear Mode
