CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > Tecplot

highlighting a region of the y-axis or x-axis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 6, 2021, 21:57
Default highlighting a region of the y-axis or x-axis
  #1
New Member
 
Islam H. Mohamed
Join Date: Oct 2014
Posts: 9
Rep Power: 9
Islam Hashem is on a distinguished road
Hello everyone,

I have a question about how to highlighting a region of the y-axis or x-axis with a specific color in Tecplot like the figure below.

Best regards,
Islam
Attached Images
File Type: png Plot.png (15.9 KB, 3 views)
Islam Hashem is offline   Reply With Quote

Old   August 10, 2021, 14:15
Default
  #2
Member
 
Scott Fowler
Join Date: May 2009
Posts: 66
Rep Power: 14
wsfowler is on a distinguished road
Tecplot 360/Focus doesn't have an "axis highlight" option built-in. But you could achieve the effect by using a Rectangle geometry.

From the Insert menu select Rectangle. This will change the mouse tool and you can draw a rectangular geometry in the region of interest. Double-click on the rectangle and you can change the following settings:

Draw Order: Before Data
Coordinate System: Grid

Then you can type in exact X,Y,Width,Height values to make sure it's in the correct spot.

I hope that helps.
Scott
wsfowler is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Maximum number of iterations exceeded chtmultiregionsimpleFoam Moncef OpenFOAM Running, Solving & CFD 28 July 13, 2020 15:26
alphat Wien3 OpenFOAM Running, Solving & CFD 22 August 15, 2019 11:00
What exactly the Relaxation factor does? Raza Javed OpenFOAM Running, Solving & CFD 11 July 2, 2019 04:42
conjugate heat transfer in OpenFOAM skuznet OpenFOAM Running, Solving & CFD 99 March 16, 2017 06:07
Taking too much for run Grimoli OpenFOAM Running, Solving & CFD 5 November 26, 2013 21:07


All times are GMT -4. The time now is 15:38.