CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[GAMBIT] When meshing cannot link faces.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 26, 2014, 21:17
Default When meshing cannot link faces.
  #1
Member
 
wanghuo
Join Date: Aug 2014
Posts: 89
Rep Power: 10
hotboy is on a distinguished road
This a geometry of a water tube -geo.jpg.Wen meshing,I want to link the two face.jpg,but the gambit prompts:ERROR:Cannot link faces face1,face6 duo to all loops of edges not being specified.That is why? Thank you !
hotboy is offline   Reply With Quote

Old   November 27, 2014, 00:59
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,293
Rep Power: 39
-mAx- will become famous soon enough
you don't need to link the faces.
I would split both cylindesr at the extremities, then mesh the central volume prior to both cylinders
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   December 21, 2014, 08:00
Default
  #3
Member
 
wanghuo
Join Date: Aug 2014
Posts: 89
Rep Power: 10
hotboy is on a distinguished road
This is a simple example ,I want to find the find reasons .The problem often display in the complex exmples when I was meshing.
hotboy is offline   Reply With Quote

Old   December 22, 2014, 06:00
Default
  #4
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,293
Rep Power: 39
-mAx- will become famous soon enough
I could reproduce your issue.
I fixed it, by splitting both surfaces.
It is possible that gambit has a problem with a hole in a surface.
Untitled.png
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface Kryo OpenFOAM Meshing & Mesh Conversion 13 February 17, 2022 07:34
[Other] Mesh Importing Problem cuteapathy ANSYS Meshing & Geometry 2 June 24, 2017 05:29
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 01:08
[blockMesh] BlockMeshmergePatchPairs hjasak OpenFOAM Meshing & Mesh Conversion 11 August 15, 2008 07:36
Error to re-open fluent case file J.Gimbun FLUENT 0 April 27, 2006 08:42


All times are GMT -4. The time now is 10:29.