CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Workbench mesh Inflation Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 14, 2020, 10:03
Default Workbench mesh Inflation Problem
  #1
New Member
 
Join Date: Jun 2020
Posts: 1
Rep Power: 0
Med_91 is on a distinguished road
Hello,
I have a problem when trying to add inflation into boundary layer in the external section wall, while having face meshing into my fluid domain which i devided into 8 faces.
the problem is that inflation and face mesh do not work together, and if i try to remove face mesh i am not be able to have structural meshing inside my fluid domain, any suggestions to have inflation while still having structural mesh ?
Attached Images
File Type: png Capture.PNG (167.0 KB, 7 views)
Med_91 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 32 February 7, 2018 08:26
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
[ICEM] Problem making structured mesh on a surface froztbear ANSYS Meshing & Geometry 4 November 10, 2011 08:52
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 11:55
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 09:38


All times are GMT -4. The time now is 02:14.