Entries for March 2020

[QUOTE=bigphil;760919][LIST][*]D is the total displacement[*]DD is the increment of displacement i.e. DD = D - D_0[*]D_0 is the old-time total displacement[*]U is the velocity[*]pointD is D interpolated (in the solver) to the mesh points: this interpolation is a but more accurate than the interpolation by ParaView[*]similarly pointDD is the point version of DD

So when using "warp by vector", use D or pointD fields (D will be interpolated to the points by ParaView so it should...

CFD Flow Engineering

1) CFD Basics for Beginners:


https://cfdflowengineering.com/basic...for-beginners/

2) CFD of Turbo-machinery:

https://cfdflowengineering.com/cfd-m...rbo-machinery/


3) Combustion Basic and CFD Modeling

https://cfdflowengineering.com/combu...-for-beginner/


4) CFD Modeling Turbulent Combustion


...

This blog is first of the two part blog related to DPM Modeling. It is not to be considered as a professional document. Nor is it meant for those who consider themselves to be expert in DPM. It is meant as a guide for the beginners who want to understand various aspects related to DPM Modeling. Though terminology is meant to be general but it is rather closer to the one used in Fluent. Of course, experts are also welcome to go through it and share their comments.

Assume that there...