CONVERGE

Read this first: How to ask a question on the forums

Page 2 of 24

Threads in Forum : CONVERGE

Rating Thread / Thread Starter	Last Post	Replies	Views
Error running Converge Failed MPI File Open Kurik	August 2, 2016 11:44 by SauravMitra	1	2,457
Reaction Mechanism Issue (Therm.dat) MFGT	August 18, 2016 04:54 by MFGT	4	2,450
Conjugate Heat Transfer giovannidv3	June 29, 2016 17:57 by jlemoine	15	2,446
Combustion simulation and SAGE settings Owain_Parry	January 21, 2017 09:56 by MFGT	6	2,389
Compressible liquid flow solver anon_p	October 31, 2016 13:37 by xieshengbai	3	2,383
temperature is greater than max_temp in calc_temp_fraction amrrhm	October 1, 2019 16:50 by Ahamed	3	2,381
Negative Cp in therm.dat kri321shna	August 6, 2020 01:08 by adityaRaman	13	2,363
how to make animation in converge minipaula	November 24, 2018 10:13 by davegerber	3	2,362
Allignment error in converge kri321shna	July 15, 2016 00:54 by kri321shna	4	2,317
Massive speed penalty when using HPC Pack 2012 Cluster Manager Pndsc	February 5, 2016 10:44 by ywang89	4	2,313
Surrogate Fuels MFGT	February 15, 2017 12:15 by MFGT	12	2,306
Using ECFM-3Z for GDI combustion simulation krsna100@gmail.com	January 31, 2018 09:12 by Eleven Leo	15	2,295
Welcome from Convergent Science senecal	January 6, 2016 11:37 by senecal	0	2,291
CONVERGE executable is invalid amin_u50	September 1, 2020 21:44 by Night Nine	8	2,248
how to set therm&mech.dat format in converge2.3.10 hanxu_tju	December 23, 2016 00:04 by hanxu_tju	5	2,246
Mechanism Reduction Module roger1	May 8, 2020 06:29 by jiajia	5	2,227
getting abort code 1 - Error analysis naveenr75	September 26, 2017 16:29 by ksrivast	3	2,169
negative volume for the given geometry Saha S	July 27, 2019 14:40 by Alireza_Kakoee	13	2,151
Problem with the software license estevaotolentino	October 13, 2016 10:36 by xieshengbai	1	2,144
Therm.dat Arun K	July 12, 2020 10:06 by Arun K	5	2,131
Can we do a 2d simulation in Converge CFD ? Tarun0906	May 23, 2018 16:21 by Tarun0906	8	2,125
Swirl Ratio (SR) VS. Swirl (1/min) Fluent learner	June 20, 2016 08:43 by Fluent learner	2	2,105
Biodiesel case setup in Converge Vaibhavk	March 22, 2022 02:01 by motoxu	5	2,101
Periodic boundary conditions TWIN	January 6, 2020 13:46 by filipimfs	13	2,064
Import geometry into converge Fluent learner	May 3, 2016 09:56 by alemoine	3	2,062
Soot Model Fadzli	December 29, 2016 10:21 by Fadzli	4	2,032
COmbustion model: ECFM-3Z whysoserious	February 28, 2017 20:10 by zhangyan	4	2,026
tutorial documents cnaksoy	April 26, 2018 09:36 by Dan.Maciejewski	1	2,003
mpi run problem signal 11 (segmentation fault) FGM simulation Fedindras	October 26, 2017 16:05 by ksrivast	1	1,993
Parallel Block Size Issue ChiefSeaBiscuit	July 22, 2016 14:03 by alemoine	5	1,979
Converge Error,, Doo Hee Yoon	May 28, 2017 11:13 by MFGT	3	1,979
What‘s wrong with my cvg case? WUJT	October 13, 2017 12:19 by ksrivast	8	1,963
error in simulaton jiliyur	December 12, 2017 04:29 by jiliyur	9	1,962
Load Balancing Issue kahjoonyong	November 10, 2017 12:18 by kahjoonyong	2	1,947
Gas simulation setup anon_p	April 30, 2019 11:49 by xieshengbai	7	1,920
Evaporation and film forming amrrhm	May 24, 2016 14:56 by yli	3	1,887
Temperature extrapolation error magicbretzel	February 16, 2021 14:59 by magicbretzel	3	1,884
Problems with boundary conditions in compressible flows RiccardoCFD	October 27, 2016 11:56 by xieshengbai	5	1,865
Problems with mech.dat in Converge 2.3.16 RiccardoCFD	November 17, 2016 16:26 by xieshengbai	1	1,865
UDF :: trying to use parcel->user kabil	September 6, 2016 10:55 by SauravMitra	5	1,862

Read this first: How to ask a question on the forums

Page 2 of 24

Last »

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 02:49.