Erosion modeling in OpenFOAM 2.1.0

mecbe2002 · December 30, 2011, 00:25

Hi all,

I want to analyse erosion in pipe (gas+sand, oil+sand) using OF 2.1.0

To start with i planning to simulate a simple pipe elbow, please suggest the solver to use and any tutorials/doumentation for this.

Regards
mecbe

mecbe2002 · January 2, 2012, 00:35

Hi all,

My problem is to simulate the gas+sand flow in a pipe+bend model to calculate the erosion rate, talking into account the following

Effect of turbulence on the dispersion phase
Lagragian formulation - effect of Drag and the force of gravity

Which Erosion model to use and which multi-phase solver to use ? Also how to include the various effect of turbulence etc..

Regards
mecbe

wyldckat · January 2, 2012, 08:48

Greetings mecbe,

There are a lot of people on vacation right now, so here are a few tips from the little that I know of:

And that's about it. First one was found by searching here in the forum for "openfoam sand" and the second one for "openfoam grain".

I vaguely remember one about snow, but I haven't found it again.

Good luck!
Bruno

mecbe2002 · January 3, 2012, 04:16

Hi Bruno,

Thanks for the reply. The first post was useful, if u ve any doc's related to erosion modeling using OF, plz forward

Regards
mecbe

mecbe2002 · January 6, 2012, 00:36

Hi all,

I want to simulate "Erosion in pipe-elbow" using Euler-Lagrange model. Which multiphase solver in OpenFOAM is capable of doing this, also i want to include the effect due to "Temperature gradient (Thermophoretic effect), Saffman Lift force and Non-Spherical Drag Law.

I am interested in particle tracking and erosion rate of pipe.

Thanks
KGN

mecbe2002 · January 25, 2012, 00:10

Any help ???

farahiam · November 9, 2017, 21:29

Hi Mcbe!

Do you manage to simulate the slurry model?
I know that there is tutorial in OpenFOAM called cyclone in the MPPICFoam solver which can model slurry.

But I have difficulty in plotting the rate of erosion after running the simulation because I don't know how to do it.
Do you know how to plot/obtain results for rate of erosion could you please help me on this matter..

December 30, 2011, 00:25	Erosion modeling in OpenFOAM 2.1.0	#1
mecbe2002 Senior Member KGN Join Date: Oct 2009 Location: Chennai, India Posts: 121 Rep Power: 17	Hi all, I want to analyse erosion in pipe (gas+sand, oil+sand) using OF 2.1.0 To start with i planning to simulate a simple pipe elbow, please suggest the solver to use and any tutorials/doumentation for this. Regards mecbe

January 2, 2012, 00:35		#2
mecbe2002 Senior Member KGN Join Date: Oct 2009 Location: Chennai, India Posts: 121 Rep Power: 17	Hi all, My problem is to simulate the gas+sand flow in a pipe+bend model to calculate the erosion rate, talking into account the following Effect of turbulence on the dispersion phase Lagragian formulation - effect of Drag and the force of gravity Which Erosion model to use and which multi-phase solver to use ? Also how to include the various effect of turbulence etc.. Regards mecbe

January 2, 2012, 08:48		#3
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,981 Blog Entries: 45 Rep Power: 129	Greetings mecbe, There are a lot of people on vacation right now, so here are a few tips from the little that I know of: http://www.cfd-online.com/Forums/ope...-possible.html http://www.cfd-online.com/Forums/ope...ocumented.html And that's about it. First one was found by searching here in the forum for "openfoam sand" and the second one for "openfoam grain". I vaguely remember one about snow, but I haven't found it again. Good luck! Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM Last edited by wyldckat; January 2, 2012 at 08:48. Reason: typo

January 6, 2012, 00:36	Pipe erosion modeling using Euler-Lagrange	#5
mecbe2002 Senior Member KGN Join Date: Oct 2009 Location: Chennai, India Posts: 121 Rep Power: 17	Hi all, I want to simulate "Erosion in pipe-elbow" using Euler-Lagrange model. Which multiphase solver in OpenFOAM is capable of doing this, also i want to include the effect due to "Temperature gradient (Thermophoretic effect), Saffman Lift force and Non-Spherical Drag Law. I am interested in particle tracking and erosion rate of pipe. Thanks KGN

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 3, 2012, 04:16		#4
mecbe2002 Senior Member KGN Join Date: Oct 2009 Location: Chennai, India Posts: 121 Rep Power: 17	Hi Bruno, Thanks for the reply. The first post was useful, if u ve any doc's related to erosion modeling using OF, plz forward Regards mecbe

January 25, 2012, 00:10		#6
mecbe2002 Senior Member KGN Join Date: Oct 2009 Location: Chennai, India Posts: 121 Rep Power: 17	Any help ???

November 9, 2017, 21:29		#7
farahiam New Member farahidayu Join Date: Aug 2010 Posts: 20 Rep Power: 16	Hi Mcbe! Do you manage to simulate the slurry model? I know that there is tutorial in OpenFOAM called cyclone in the MPPICFoam solver which can model slurry. But I have difficulty in plotting the rate of erosion after running the simulation because I don't know how to do it. Do you know how to plot/obtain results for rate of erosion could you please help me on this matter..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SGI/OpenCFD release OpenFOAM® version 2.1.0	opencfd	OpenFOAM Announcements from ESI-OpenCFD	1	December 20, 2011 00:24
Cross-compiling OpenFOAM 1.6 on Linux for Windows 32 and 64bits with Mingw-w64	wyldckat	OpenFOAM Announcements from Other Sources	7	January 19, 2010 15:39
Critical errors during OpenFoam installation in OpenSuse 11.0	amscosta	OpenFOAM	5	May 1, 2009 14:06
The OpenFOAM extensions project	mbeaudoin	OpenFOAM	16	October 9, 2007 09:33
OpenFOAM Training and Workshop	Hrvoje Jasak	Main CFD Forum	0	October 7, 2005 07:14