OpenFOAM Meshing & Mesh Conversion

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 39 of 147 « First < 29 37 38 39 40 41 49 89 139 > Last »

Threads in Forum : OpenFOAM Meshing & Mesh Conversion

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: [snappyHexMesh] About snappyHexMesh ( 1 2 3) wyldckat	August 10, 2023 03:22 by H_SheikhShoaie	41	15,429
		Sticky: [blockMesh] About blockMesh wyldckat	September 30, 2022 23:10 by yzj	5	9,042
		Sticky: [Commercial meshers] About the Commercial and Closed Source Meshers discussed here wyldckat	July 22, 2020 22:09 by fumiya	3	8,397
		Sticky: [CAD formats] Creating waterproof STL using snappyHexMesh or salome ( 1 2 3) Tobi	May 13, 2020 06:01 by otaolafr	58	33,194
		Sticky: About the Open Source Meshers discussed here wyldckat	June 5, 2019 04:52 by Enrico Segre	3	10,942
		Sticky: Map of this Meshing (sub-)Forum wyldckat	April 27, 2019 09:33 by wyldckat	0	5,230
		Sticky: cfMesh: Please read this wyldckat	December 30, 2017 19:11 by wyldckat	0	7,481
		[snappyHexMesh] sHM not capturing all edges WaterHammer1985	December 27, 2019 16:16 by WaterHammer1985	3	1,766
		[Gmsh] Rotate and duplicate mesh! tareqkh	December 23, 2019 13:01 by sabuj	1	2,619
		[snappyHexMesh] SnappyHexMesh inlet Errors gberestinas	December 23, 2019 09:58 by gberestinas	0	811
		[blockMesh] Getting error message: "Fatal error Symmetry plane 'sides' is not planar" Ron de Vos	December 21, 2019 11:07 by photon_ed	5	7,140
		[blockMesh] isoAdvector joshmccraney	December 20, 2019 15:48 by joshmccraney	2	830
		[Other] (dynamicMeshDict) problems about simulating two floating bodies and its connection 七辆战车	December 17, 2019 22:37 by 七辆战车	0	655
		[blockMesh] Room Leakage charles4allme	December 17, 2019 16:57 by HPE	1	634
		[Salome] Is meshgems (add on module in salome) is good for hexmeshing of fluid domain to be ru er_ijaz	December 17, 2019 13:46 by virengos	1	1,525
		[snappyHexMesh] Mesh contains holes on interface of multiregion case DriesAllaerts	December 17, 2019 04:43 by DriesAllaerts	6	1,264
		[snappyHexMesh] SHM not refining the required space instead clusterring othe place chandra shekhar pant	December 16, 2019 07:06 by simrego	3	891
		[snappyHexMesh] Can't see layers in paraView Bollonga	December 13, 2019 10:02 by Rasmusiwersen	3	2,267
		[snappyHexMesh] No satisfying result with feature edge refinement Krapf	December 13, 2019 06:59 by xerox	5	4,348
		[blockMesh] topoSet in Parallel shimakasaei	December 12, 2019 11:56 by lebc	1	1,631
		[snappyHexMesh] featureAngle issue / boundary layer collapse marco.müller	December 10, 2019 07:57 by marco.müller	0	798
		[blockMesh] connecting to objects suhrab yousufzai	December 10, 2019 06:11 by suhrab yousufzai	0	684
		[blockMesh] blockMesh: merging two unmatching faces pbe_cfd	December 10, 2019 05:38 by suhrab yousufzai	7	3,999
		[Gmsh] GmshToFoam warnings andybond13	December 8, 2019 13:58 by sourav90	13	4,952
		[snappyHexMesh] Sharp edges of the stl file after importing chandra shekhar pant	December 8, 2019 03:15 by Bazinga	11	1,334
		[snappyHexMesh] Over refined mesh user007	December 7, 2019 10:05 by Bazinga	3	886
		[snappyHexMesh] [Helyx OS] Layers appear in mm, not in m kim0304	December 6, 2019 07:46 by kim0304	1	1,152
		[snappyHexMesh] concave cells/concaveFaces shimakasaei	December 5, 2019 17:09 by shimakasaei	5	1,928
		[snappyHexMesh] meshing smoothness problem lasherwc	December 5, 2019 08:41 by lasherwc	4	851
		[blockMesh] Submerged deck in wave tank blockMesh Cjyowen	December 5, 2019 06:05 by Cjyowen	2	825
		[snappyHexMesh] [Urgent] emesh file corrupted kelvinaaa	December 5, 2019 05:55 by kelvinaaa	5	962
		[snappyHexMesh] snappyHexMesh/produces a decomposition that has a min volume greater than tolerance shimakasaei	December 4, 2019 17:38 by HPE	1	759
		[snappyHexMesh] The mesh has distorted to it original kelvinaaa	December 4, 2019 17:36 by HPE	1	804
		[snappyHexMesh] Meshing of multiple regions sunny21996	December 4, 2019 17:22 by HPE	2	907
		[snappyHexMesh] snappyHexMesh failing to snap ("did not find surface within...") Jaworski.Mike	December 2, 2019 20:13 by ahmetsen	7	9,771
		[snappyHexMesh] Problem with rectangular holes flowwwww	December 2, 2019 13:34 by flowwwww	0	952
		[Gmsh] Gmsh 3.0 - Boundary layer mesh PaulBet	December 2, 2019 09:33 by MesherDuke	4	11,264
		[mesh manipulation] refineWallLayer - error dodobenq	December 1, 2019 07:17 by chandra shekhar pant	3	3,244
		[Commercial meshers] Merge meshes and set up an AMI cyclic problem aradisa	December 1, 2019 05:11 by Krao	1	709
		[blockMesh] Error: face does not have neighbour cell face kelvinaaa	November 30, 2019 21:43 by kelvinaaa	0	1,274
		[blockMesh] How to assign the Symmetry boundary condition in blockMeshDict OpenFOAM? vignesh_sr	November 29, 2019 04:55 by vignesh_sr	0	1,078
		[Other] Dynamic mesh dose not move correctly under oscillatingDisplacement condition sakura_maru	November 27, 2019 16:54 by dduque	1	1,151
		[Gmsh] gmshToFoam error afshinb	November 27, 2019 08:50 by ncrasta	6	3,113
		[blockMesh] Number of cells Samsam2	November 26, 2019 09:05 by Samsam2	4	2,361
		[Gmsh] Cannot transfer physical surfaces to patches inside the boundary file celestial	November 25, 2019 15:58 by celestial	3	1,006
		[Other] cfMesh voronoi command Carlo_P	November 24, 2019 13:46 by Carlo_P	0	686
		[Gmsh] Gmsh - Pipe Mesh issues labengg98	November 22, 2019 14:15 by labengg98	0	804

Read this first: How to ask a question on the forums

Page 39 of 147 « First < 29 37 38 39 40 41 49 89 139 > Last »

Display Options

Showing threads 1521 to 1560 of 5865

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning Prefix (any prefix) (no prefix) [blockMesh] [CAD formats] [CGNS] [Commercial meshers] [foamyMesh] [Gmsh] [mesh manipulation] [Netgen] [Salome] [snappyHexMesh] [surface handling] [Technical] [Other]

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules