OpenFOAM Meshing & Mesh Conversion

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 49 of 147 « First < 39 47 48 49 50 51 59 99 > Last »

Threads in Forum : OpenFOAM Meshing & Mesh Conversion

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: [snappyHexMesh] About snappyHexMesh ( 1 2 3) wyldckat	August 10, 2023 03:22 by H_SheikhShoaie	41	15,316
		Sticky: [blockMesh] About blockMesh wyldckat	September 30, 2022 23:10 by yzj	5	8,984
		Sticky: [Commercial meshers] About the Commercial and Closed Source Meshers discussed here wyldckat	July 22, 2020 22:09 by fumiya	3	8,329
		Sticky: [CAD formats] Creating waterproof STL using snappyHexMesh or salome ( 1 2 3) Tobi	May 13, 2020 06:01 by otaolafr	58	32,915
		Sticky: About the Open Source Meshers discussed here wyldckat	June 5, 2019 04:52 by Enrico Segre	3	10,868
		Sticky: Map of this Meshing (sub-)Forum wyldckat	April 27, 2019 09:33 by wyldckat	0	5,205
		Sticky: cfMesh: Please read this wyldckat	December 30, 2017 19:11 by wyldckat	0	7,443
		[snappyHexMesh] SnappyHexMesh Refinement nCellsBetweenLevels laymelek	December 22, 2018 16:33 by wyldckat	13	7,724
		[Commercial meshers] Garbled of faces etc. after fluentMeshToFoam Sean Zhao	December 20, 2018 03:21 by Sean Zhao	1	739
		[snappyHexMesh] snappyHexMesh remove cells in the edges samuel_rff	December 20, 2018 03:20 by samuel_rff	1	774
		[blockMesh] blockMesh multiple merging on same hex krzychu111	December 20, 2018 00:03 by Antimony	1	1,203
		[Other] Definations of CellZone, FaceZone, CellRegion qjh888	December 17, 2018 12:39 by Malkocoglu	9	3,702
		[Other] CheckMesh Error alinuman15	December 16, 2018 05:33 by tobiasS	3	798
		[Other] Problem with Baffles creation pedroamaral	December 14, 2018 05:27 by pedroamaral	1	921
		[CGNS] CGNS converters available ( 1 2 3 ... Last Page) mbeaudoin	December 14, 2018 04:20 by volker1	137	55,797
		[Other] Openfoam mesh to Comsol Physics elquetemete	December 13, 2018 15:10 by elquetemete	0	1,072
		[snappyHexMesh] Tried using snappyhexmesh to mesh propeller but there is error zhi	December 13, 2018 12:42 by hokhay	1	828
		[snappyHexMesh] Number of cells in mesh don't match with size of cellLevel colinB	December 12, 2018 08:07 by Akshay_11235	14	18,975
		[blockMesh] Blockmesh to generate a surface-mounted cube eddykendo	December 11, 2018 21:53 by eddykendo	0	882
		[snappyHexMesh] Motorbike example: Failed 1 mesh checks lhsihan	December 11, 2018 07:54 by lhsihan	2	1,817
		[blockMesh] Openfoam: Meshing, where do my defaultFaces come from syntex	December 10, 2018 07:21 by syntex	19	2,082
		[surface handling] surfaceFeatureExtract error ssa_cfd	December 7, 2018 07:32 by ssa_cfd	0	1,244
		[Other] Conversion of OpenFoam mesh to .CGNS form harsha_kulkarni	December 7, 2018 04:54 by harsha_kulkarni	0	741
		[snappyHexMesh] Poor coverage layer gm2gabriel	December 6, 2018 11:16 by gm2gabriel	0	1,033
		[snappyHexMesh] pimpleDyFoam - propellor ssa_cfd	December 6, 2018 09:34 by simrego	1	760
		[CAD formats] Dividing mesh surfaces in stl file krzychu111	December 4, 2018 11:06 by krzychu111	0	802
		[blockMesh] Wierd behaviour of blockMesh creating axis in wedge rcastilla	December 4, 2018 06:24 by rcastilla	1	811
		[blockMesh] Creating a tapered cylinder tanveerfathima	December 4, 2018 06:22 by yambanshee	1	1,038
		[Gmsh] Converting 3d mesh to 2d mesh krzychu111	December 1, 2018 15:18 by simrego	3	1,949
		[snappyHexMesh] snappyHexMesh not reading stl file vikramrajagopalan	November 30, 2018 20:08 by vikramrajagopalan	1	769
		[snappyHexMesh] How to use displacementMotionSolver edomalley1	November 30, 2018 03:36 by simrego	1	1,956
		[snappyHexMesh] can snappy run with multiple block in blockMesh BakedAlmonds	November 29, 2018 06:30 by CFDMagnus	9	2,665
		[Salome] Meshing a STL File in Salome Fool	November 28, 2018 09:39 by Fool	0	1,949
		[Other] Embedded cylindrical mesh JBrake	November 27, 2018 19:52 by JBrake	0	1,046
		[snappyHexMesh] wind around building typerhack	November 27, 2018 00:26 by KTG	1	1,270
		[Gmsh] Boundary layer not created during gmshToFoam for Gmsh4.0 hasankhan	November 24, 2018 23:29 by openfoamtutorials	1	1,035
		[Other] OpenFOAM - structured or unstructured Grids ? ( 1 2) thomasduerr	November 24, 2018 23:18 by openfoamtutorials	22	22,230
		[Other] Looking for advice for Meshing software Bazinga	November 24, 2018 23:07 by openfoamtutorials	6	1,361
		[Other] Axisymmetric Taylor Couette Flow sxpsxp007	November 24, 2018 23:05 by openfoamtutorials	1	1,095
		[snappyHexMesh] snappyHexMesh, new timestep creation and field and mesh dont have the same #points Loekatoni	November 23, 2018 09:11 by Loekatoni	1	953
		[blockMesh] checkMesh for a Hollow Cylinder hwsv07	November 22, 2018 07:59 by Kevin.H	9	3,065
		[snappyHexMesh] SnappyHexMesh with .stl-geometry Stefanie.S.W.	November 22, 2018 03:36 by RobertHB	6	2,553
		[snappyHexMesh] Low Quality SnappyHexMesh y_jiang	November 21, 2018 15:14 by y_jiang	2	4,274
		[mesh manipulation] splitting patch into two boundary conditions using splitMesh salomama	November 21, 2018 10:17 by ChristianLackner	3	1,494
		[snappyHexMesh] snappyHexMesh works well for full model, but fails for half model xuankushuocai	November 21, 2018 10:04 by devil_09	7	1,602
		[Other] question about castellateMesh nago	November 19, 2018 21:57 by nago	1	987
		[Other] Meshfile too large Jalil786	November 19, 2018 14:46 by Jalil786	0	836

Read this first: How to ask a question on the forums

Page 49 of 147 « First < 39 47 48 49 50 51 59 99 > Last »

Display Options

Showing threads 1921 to 1960 of 5848

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning Prefix (any prefix) (no prefix) [blockMesh] [CAD formats] [CGNS] [Commercial meshers] [foamyMesh] [Gmsh] [mesh manipulation] [Netgen] [Salome] [snappyHexMesh] [surface handling] [Technical] [Other]

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules