|
[Sponsors] |
October 10, 2008, 09:46 |
Hi all,
I'm new to OpenFoam
|
#1 |
New Member
Maria Vidal
Join Date: Mar 2009
Posts: 1
Rep Power: 0 |
Hi all,
I'm new to OpenFoam and i would really appreciate some guidelines and help in setting up my model: I'm beginning by a simple steady thermal model (use Laplacianfoam solver), in which in one of the boundary faces i need to set a heat flux dependent on position at the face as, let's say, a gaussian type: -K (grad T) = P*exp(-(x^2 +y^2)) Any hint of how to proceed? Or someone with similar problem? |
|
December 22, 2008, 16:01 |
Search the post with title "Pa
|
#2 |
Member
Heng Xiao
Join Date: Mar 2009
Location: Zurich, Switzerland
Posts: 58
Rep Power: 17 |
Search the post with title "Parabolic inlet velocity profile", start from there, and change the code of the boundary conditions to suit your needs. Should not be too difficult. There is no existing solution in Foam currently, at least as I know of.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Burgerbs equation non constant Boundary Conditions Initial Conditions | arkangel | OpenFOAM Running, Solving & CFD | 1 | October 2, 2008 14:48 |
Boundary conditions for turbulent boundary layer | Thomas | FLUENT | 1 | June 17, 2008 05:14 |
boundary conditions for boundary layer flow | A. Al-zoubi | CFX | 0 | November 3, 2007 07:11 |
Integral boundary conditions turbulent intensitylength boundary conditions | olesen | OpenFOAM Running, Solving & CFD | 0 | July 27, 2006 07:18 |
DPM Boundary Conditions, UDF | Juan | FLUENT | 1 | November 11, 2005 14:37 |