OpenFOAM

Rating Thread / Thread Starter	Last Post	Replies	Views
Sticky: Getting Started with OpenFOAM ( 1 2) wyldckat	June 21, 2024 06:54 by Martin_Sz	26	53,658
Sticky: OpenFOAM.com versus OpenFOAM.org: Which version to use? wyldckat	March 25, 2023 07:50 by ancolli	19	66,096
Sticky: Map of the OpenFOAM Forum - Understanding where to post your questions! wyldckat	September 2, 2021 05:29 by hakosaj	10	22,419
Sticky: How to contribute to the community of OpenFOAM users and to the OpenFOAM technology wyldckat	November 10, 2017 15:54 by rdbisme	17	21,385
Sticky: How to give enough info to get help linnemann	September 20, 2017 09:19 by linnemann	8	57,548
Sticky: Wiki ( 1 2 3 ... Last Page) gschaider	December 31, 2014 07:34 by wyldckat	178	70,283
How to convert psiChemistryModel for multi Zone? Hanzo	November 21, 2012 04:16 by Hanzo	1	1,700
using GAMG in rhoSimplecFoam tutorial. why? Farshad_Noravesh	November 21, 2012 01:38 by Farshad_Noravesh	0	1,778
Gmsh+SimpleFoam issue vhgarzonr	November 20, 2012 11:17 by vhgarzonr	0	1,712
problems running AMI MUZ	November 20, 2012 06:18 by Lieven	6	1,751
How to generate a new 6DoF.dat? julmh	November 20, 2012 04:37 by julmh	2	2,418
Steady vs. Unsteady solution samiam1000	November 20, 2012 02:57 by samiam1000	6	2,585
dot product of volvectorfield latvietis	November 20, 2012 02:16 by niklas	1	3,852
Boundary conditions zaynah04	November 19, 2012 18:16 by Ahmed Khattab	6	1,242
visouse correction in rhoCentralFoam hg2lf	November 19, 2012 08:39 by hg2lf	0	1,767
modified mean kinematic pressure ?? hz283	November 18, 2012 17:46 by hz283	0	2,033
Modeling Conveccion Natural!! jobito_2012	November 18, 2012 17:27 by jobito_2012	11	2,661
location of each cell hawkeye321	November 17, 2012 15:15 by aujamal20	6	1,607
What may lead to a large value of k on the wall in a channel flow? Sunxing	November 17, 2012 07:42 by Sunxing	0	1,162
Stress-Strain curve for linear elastic material. Sargam05	November 16, 2012 20:40 by Sargam05	0	1,517
heat transfer with laminar flow David_010	November 16, 2012 16:05 by DineshramBalaji	10	6,047
Initial conditions for uniform flow andreas	November 16, 2012 15:00 by Lieven	5	4,107
How to access the field of weighting factor of interpolations fumiya	November 16, 2012 07:33 by fumiya	2	1,798
Test-case NLF-414 airfoil ( 1 2) salvoblack	November 16, 2012 00:02 by linnemann	21	4,839
Bug in fvc::grad() and periodic boundary condition JBUNSW	November 15, 2012 03:09 by JBUNSW	3	2,939
Ehd niaz	November 14, 2012 17:24 by salehda	1	2,027
Evaluate average T inside a certain volume samiam1000	November 14, 2012 09:45 by samiam1000	0	1,351
Cannot find -lOpenFOAM in 1.7.x install scott	November 14, 2012 09:29 by bmikuz	3	3,306
Why Uprime2mean is minus in some grids? maysmech	November 14, 2012 07:31 by arunsmec	19	6,393
reconstructPar and compressed file format emouris	November 14, 2012 05:26 by emouris	0	1,994
IBM for Moving boundary niaz	November 13, 2012 22:28 by xbchen168	1	1,607
Alternatives for InterFoam - High Viscosity Ratio Problem saba_saeb	November 13, 2012 16:57 by kwardle	3	2,423
ERCOFTAC centrifugal pump application error message dogan	November 13, 2012 08:21 by dogan	0	1,561
strange wave profile. Cloudy1988	November 13, 2012 05:19 by ngj	6	2,474
Error occured when I tried to make mesh sangje2001	November 12, 2012 13:14 by sangje2001	0	1,290
Modeling of flow around a submerged monopile Sagun	November 12, 2012 10:26 by Josh Yang	5	2,273
Error whit foamDataToFluent matteo_gautero	November 12, 2012 04:46 by Harikrishnan	1	2,577
unsteady flamelet babakflame	November 11, 2012 13:11 by francesco_capuano	1	1,693
Mesh in LES Djub	November 9, 2012 10:25 by Bernhard	2	2,626
Wrong Oriented Faces checkMesh Kentin	November 9, 2012 09:06 by Kentin	0	1,844
Face with no owner amtri	November 9, 2012 07:39 by Bandfrosch	2	1,492
viewFactor radiation model feldy77	November 9, 2012 02:26 by stawrogin	1	2,617
how to scale volScalarField mikeP	November 8, 2012 16:39 by mikeP	0	1,135
mapFields problem martyn88	November 8, 2012 13:42 by LauraP	1	2,015
Aspect ratio tayo	November 8, 2012 12:47 by tayo	2	1,494
Do I need to change mechnical properties after using transformpoint scale utility? Sargam05	November 8, 2012 11:35 by Sargam05	4	1,382

Read this first: How to ask a question on the forums

Page 131 of 243

131

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 19:14.