OpenFOAM

Rating Thread / Thread Starter	Last Post	Replies	Views
Sticky: OpenFOAM.com versus OpenFOAM.org: Which version to use? wyldckat	March 25, 2023 07:50 by ancolli	19	58,734
Sticky: Getting Started with OpenFOAM ( 1 2) wyldckat	August 14, 2022 13:55 by mikethe1wheelnut	25	50,288
Sticky: Map of the OpenFOAM Forum - Understanding where to post your questions! wyldckat	September 2, 2021 05:29 by hakosaj	10	21,448
Sticky: How to contribute to the community of OpenFOAM users and to the OpenFOAM technology wyldckat	November 10, 2017 15:54 by rdbisme	17	20,190
Sticky: How to give enough info to get help linnemann	September 20, 2017 09:19 by linnemann	8	55,136
Sticky: Wiki ( 1 2 3 ... Last Page) gschaider	December 31, 2014 07:34 by wyldckat	178	67,269
axial velocity in bend pipe with adverse pressure gradient liguifan	July 24, 2011 05:56 by liguifan	0	2,274
compressible pipe flow with varying density nandiganavishal	July 23, 2011 19:20 by nandiganavishal	0	1,739
Add new species in time directory goen	July 22, 2011 21:41 by goen	6	1,592
Tank Mixing Simulations insane_alien	July 22, 2011 14:17 by kwardle	5	4,794
Need some help getting the engineFoam demo to work MrDomino	July 22, 2011 13:50 by goen	4	1,847
Mesh check fail eddiejohn	July 22, 2011 06:07 by OF_NACA	7	1,951
SAS Turbulence model in OpenFOAM Steven85	July 22, 2011 04:36 by Steven85	0	3,495
Lagrangian particles (change density and diameter) kel85uk	July 22, 2011 04:01 by kel85uk	1	1,700
Assign Boundary conditions using utility tonyuprm	July 21, 2011 17:37 by mturcios777	3	2,056
cellSets vs. cellZones Cyberholmes	July 21, 2011 16:45 by kwardle	1	2,249
Access particle data from functionObject CedricVH	July 21, 2011 12:03 by kel85uk	10	4,104
New CFD student here, how 'bout some advice? iskate2	July 21, 2011 10:13 by iskate2	4	1,514
advanced function with snGrad Ingenierias2003	July 21, 2011 09:29 by Ingenierias2003	0	1,291
nutkRoughWallFunction KTHMS	July 21, 2011 08:02 by suh	1	2,568
How to (re)construct the constant/polymesh directory ? Clementhuon	July 21, 2011 07:54 by Clementhuon	4	2,876
convergence with simple foam and different fvSchemes subhkirti	July 21, 2011 02:32 by subhkirti	7	5,208
2D case giving 3D result lovecraft22	July 21, 2011 02:18 by lovecraft22	10	1,533
Relative flux in pimpleDyMFoam Igor_2011	July 20, 2011 17:50 by Igor_2011	0	2,134
OpenFOAM ETH Zurich course material vetnav	July 20, 2011 13:32 by vetnav	0	2,758
transportModels/viscosityModels mugi	July 20, 2011 10:07 by mugi	0	1,107
rhoCentralFoam Solver venkataramana	July 20, 2011 09:58 by Rophys	3	1,417
how to deal with bad quality cells? phsieh2005	July 20, 2011 09:35 by sambo	3	2,107
Phase initialization in OpenFoam Gitesh P	July 20, 2011 08:33 by Gitesh P	0	1,362
Install troubles on fedora yoshimitsuspeed	July 20, 2011 02:49 by joel.lehikoinen	1	2,070
scale problem wouter	July 19, 2011 17:26 by wouter	0	1,418
alternateSteadyReactingFoam + CanteraError rishibigghe	July 19, 2011 16:41 by rishibigghe	0	1,310
Filter menu of ParaView is disabled after upgrading from Ubuntu 10.04 to 10.10 maysmech	July 19, 2011 16:13 by wyldckat	12	5,728
reconstructed velocity in InterFoam Andrea_85	July 19, 2011 10:05 by Andrea_85	0	1,391
How dieselEngineFoam work? goen	July 19, 2011 09:51 by goen	0	1,272
units in OpenFOAM megacrout	July 19, 2011 08:04 by megacrout	4	7,796
convergence problem when use pisoFoam, LES for wind tunnel case Forrest_Lei	July 19, 2011 06:00 by OF_NACA	3	4,747
Mesh refinement across the curve Aleksey_R	July 18, 2011 14:58 by Aleksey_R	0	1,444
fireFoam windwin	July 18, 2011 09:27 by windwin	4	2,164
Linear movement of corrugated surface in simpleSRFFoam bhh	July 18, 2011 09:17 by bhh	0	1,334
1D flow canopus	July 18, 2011 06:50 by canopus	2	1,765
jumpCyclic - please help doubtsincfd	July 17, 2011 12:33 by doubtsincfd	0	1,416
definiton of volScalarField G(x, y); Burnhead	July 16, 2011 16:11 by marupio	1	1,562
mesh_(U.mesh()), Tarak	July 16, 2011 16:08 by marupio	1	1,419
blockCoupled solver ( 1 2) marupio	July 16, 2011 13:25 by holger_marschall	20	5,093
VAWT settings OF 1.5-dev enry	July 15, 2011 23:37 by desert_1250	5	2,628

Read this first: How to ask a question on the forums

Page 161 of 239

161

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 18:07.