OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Convergence with Simplefoam Yuby	March 18, 2015 05:00 by JNSN	2	1,077
cloudInfo1 problem with MPI parallel run on reactingParcelFoam JuanRodriguez	March 17, 2015 10:22 by JuanRodriguez	0	1,045
Interfoam - delta T rkanesan	March 17, 2015 07:12 by TobM	1	1,036
porousSimpleFoam error encountered..would be grateful for your help! cfd_inquirer	March 16, 2015 10:57 by cfd_inquirer	0	823
LES VS RANS results sharonyue	March 15, 2015 13:15 by sharonyue	4	2,494
buoyancy corrected turbulence models for thermal plumes derekm	March 15, 2015 04:16 by agustinvo	1	1,124
Unknown RASModel type kkLOmega derekm	March 14, 2015 09:55 by derekm	2	1,843
Wrong zone in MRF luca1989	March 14, 2015 05:43 by luca1989	1	1,273
InterFoam - time step atlan	March 13, 2015 16:09 by atlan	3	1,223
Convection to the ambient air laurentD	March 13, 2015 09:45 by laurentD	15	2,820
Interface surface of liquid (interFoam) przesmak	March 12, 2015 14:34 by raunakbardia	1	1,176
sonicFoam vs rhoCentralFoam forwardStep tutorial hk318i	March 12, 2015 11:15 by hk318i	2	3,953
Viewfactorgen - fp expception with baffles derekm	March 12, 2015 10:16 by derekm	0	837
Changing viscosity in interFoam ThomasV	March 12, 2015 06:43 by ThomasV	5	2,230
interFoam Stability Issues Dazzler	March 12, 2015 02:04 by Svensen	3	1,546
twoPhaseEulerFoam execution error Trewhela	March 11, 2015 09:40 by Trewhela	0	1,218
How can I put the heat flux into a solver? wtjhaha	March 11, 2015 03:50 by agustinvo	1	872
Compression Corner ( Hypersonic Flow ) Redoctober	March 10, 2015 16:59 by Redoctober	0	969
U velocity anomaly rietis	March 10, 2015 14:04 by rietis	17	1,298
twoLiquidMixingFoam - continuity equation jenssnej	March 10, 2015 13:30 by alexeym	9	2,060
Patch-averaging in OpenFOAM d.lagattolla	March 10, 2015 08:42 by d.lagattolla	0	921
the issue for TKE at wall wes1204	March 10, 2015 08:30 by wes1204	0	837
how to add new motion function in supercomputer chun	March 10, 2015 06:40 by chun	0	754
force coefficient's amplitude Konstantine	March 10, 2015 06:00 by Konstantine	4	1,162
EEqn.h BuoyantSimpleFoam normy	March 10, 2015 05:43 by normy	0	950
wrongOrientedFaces during the simulation phoenix_23	March 10, 2015 05:34 by phoenix_23	0	1,237
rhoCentralFoam:: pressure driven flow , pressure shoot at inlet axyz0390	March 9, 2015 23:52 by axyz0390	0	943
anyone used setFields for igniting a flame (reactingFoam) ? Dan1788	March 9, 2015 12:57 by Dan1788	3	1,340
elasticSolidFoam - crash with non-orthogonal correction mabinty	March 9, 2015 09:47 by mabinty	0	796
Running OpenFOAM on Google Mashine Michail	March 9, 2015 09:18 by Michail	0	1,176
Problem with dynamic mesh and mesh decomposition Zyryx	March 9, 2015 06:08 by Zyryx	0	942
Solver Suggestions: Incompressible, high pressure, 3 phases, steady state Sam_CFD	March 9, 2015 05:40 by Sam_CFD	11	1,211
pressure sensor on a floating body ashkan	March 9, 2015 04:14 by ashkan	2	1,406
Calculating center of mass kristaps	March 8, 2015 04:59 by 13msmemusman	2	3,612
Wingmotion Tutorial - Changing parameters? melkor	March 7, 2015 22:27 by hongfu2233	1	921
Unrealistic supersonic pockets at pressure inlet c0sk	March 7, 2015 16:52 by c0sk	0	846
problem with chtMultiRegion v.2.1 Schmetterling	March 7, 2015 15:07 by Schmetterling	4	1,196
Adding porous zones in icoFoam solver josephn	March 7, 2015 00:28 by josephn	4	3,058
Slip BC works but fixedValue for U crashes. Potential solutions? be_inspired	March 6, 2015 19:25 by be_inspired	0	803
right solver for externalWallHeatFluxTemperature ruedavallejo	March 6, 2015 11:12 by laurentD	2	1,752

Read this first: How to ask a question on the forums

Page 281 of 481

281

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 07:03.