OpenFOAM

Rating Thread / Thread Starter	Last Post	Replies	Views
Sticky: Getting Started with OpenFOAM ( 1 2) wyldckat	June 21, 2024 06:54 by Martin_Sz	26	54,344
Sticky: OpenFOAM.com versus OpenFOAM.org: Which version to use? wyldckat	March 25, 2023 07:50 by ancolli	19	67,906
Sticky: Map of the OpenFOAM Forum - Understanding where to post your questions! wyldckat	September 2, 2021 05:29 by hakosaj	10	22,759
Sticky: How to contribute to the community of OpenFOAM users and to the OpenFOAM technology wyldckat	November 10, 2017 15:54 by rdbisme	17	21,673
Sticky: How to give enough info to get help linnemann	September 20, 2017 09:19 by linnemann	8	58,109
Sticky: Wiki ( 1 2 3 ... Last Page) gschaider	December 31, 2014 07:34 by wyldckat	178	71,214
Question on learning more about OpenFoam tareqkh	December 1, 2014 20:25 by tareqkh	3	1,932
how to express a heat source term which depends on coordinate bryant_k	December 1, 2014 15:32 by a19910112a	8	5,870
Boundary conditions for fully-developed turbulent channel flow rasti	December 1, 2014 02:39 by rasti	0	1,193
cases(0,constant,system)for vawt 2-D? MAHDI1366	November 30, 2014 11:28 by MAHDI1366	0	1,048
No density change - rhoSimplecFoam krapic	November 29, 2014 18:39 by krapic	1	1,784
pressure spikes due to addition/deletion of layers kdneroorkar	November 29, 2014 12:33 by jimteb	5	2,103
Running stably with a large Courant number using pimpleFoam mlawson	November 29, 2014 10:37 by crixman	11	9,791
If a sample line coincides with faces, the user should set the set the sample line?? Hojae	November 29, 2014 05:48 by alexeym	3	2,465
converting 2D Geometry to 3D bgane67	November 28, 2014 04:23 by elvis	1	1,393
parallel run for conjugateHeatFoam elisabet	November 27, 2014 22:37 by liuke870915	16	4,675
run Doxygen offline anishtain4	November 27, 2014 09:36 by GerhardHolzinger	8	3,774
cut large geometry into pieces and take results as initial conditions for the next matzkowitzal45443	November 27, 2014 04:56 by matzkowitzal45443	0	1,400
DynamicMesh sina769	November 27, 2014 03:34 by mechy	1	2,060
Explicit evaluation of all the terms of momentum equation Andrea_85	November 25, 2014 09:39 by Andrea_85	0	1,382
converting 2D Geometry to 3D bgane67	November 25, 2014 06:10 by bgane67	0	1,136
Points that lie between two boundary patches: do they assume a mean value? Matt_B	November 24, 2014 08:47 by Matt_B	3	1,429
Mixing layers boundary conditions rakendd	November 22, 2014 17:40 by rakendd	0	1,384
pressure definition in OpenFOAM vaina74	November 20, 2014 09:02 by chegdan	3	1,487
twoPhaseEulerFoam-bubble column case Hamzeh_Mirab	November 19, 2014 11:31 by Hamzeh_Mirab	2	1,937
Incompressible turbulence models: strange implementations? AleDR	November 18, 2014 11:23 by tiam	3	3,851
Error during reconstructing lagarangian fields ybapat	November 17, 2014 07:52 by zhulianhua	9	7,532
flat plate with turbulent model danielcebrian	November 13, 2014 15:47 by mertg	10	5,586
Explanation of PIMPLE algorithm Tobi	November 8, 2014 07:01 by Tobi	7	14,034
Is it possible to simulate the withdrawal of a plate from non-newtonian fluid? Nihel	November 6, 2014 07:45 by Nihel	2	1,193
modeling Multi-component, multi-phase flow with Cahn Hilliard equation hosein67	November 4, 2014 15:00 by vonboett	3	2,585
OpenFOAM Velocity BC two orthogonal components viv123	October 31, 2014 08:28 by ssss	1	1,685
a room mechanical/natural ventilation case vaina74	October 30, 2014 03:17 by vaina74	2	3,333
(interfoam) shear stress at water air interface ! openfoam1	October 27, 2014 03:59 by idefix	11	6,246
[OpenFOAM] - Coupling dsmcFoam and laplacianFoam costrom	October 26, 2014 15:15 by costrom	0	1,564
Error will loading makeAxialMesh utility in openFOAM-1.6 ( 1 2) will_avoid_comm_solvers	October 21, 2014 05:16 by gschaider	21	5,717
From OpenFOAM to LaTeX guido.bonalumi	October 17, 2014 08:01 by guido.bonalumi	8	4,730
Introducing droneCFD -- Simplifying OpenFOAM simulations of small fixed wing aircraft capucsc	October 17, 2014 06:22 by capucsc	3	3,570
References for the limitedLinear scheme alberto	September 30, 2014 20:23 by desmoge	17	10,464
Mosquito Analysis in OpenFoam ( 1 2) psk	September 24, 2014 15:09 by maalan	32	6,255
Unable to download any content from CFDEM Website phani45	September 23, 2014 13:31 by lawal	5	2,160
high speed impacts / multiphysics PattiMichelle	September 20, 2014 10:55 by PattiMichelle	0	1,287
OpenFOAM workshop 2014 slides at http://sourceforge.net/projects/openfoam-extend/file jherb	September 18, 2014 18:12 by kmooney	4	5,345
Porosity model not found for pisoFoam; works fine for simpleFoam aerogt3	September 13, 2014 16:39 by wyldckat	2	2,002
HOWTO simpleSRFFoam JunaidAhmad	September 12, 2014 22:03 by huangxianbei	8	2,474
Simulation seems to converge but crashes suddenly xxxx	September 12, 2014 08:07 by Tushar@cfd	16	9,802

Read this first: How to ask a question on the forums

Page 100 of 244

100

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 15:23.